JKS Manufacturing Parts

Choose a Year for your vehicle

Showing 1 - 10 of 30 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2016 Jeep Wrangler JK Steering Drag Link JKS Manufacturing

Drag Link Flip Kit | Wrangler JK
For use on LHD JK models with at least 2" of suspension lift Requires 3" of front bump stop extension, JKS1130 available separately Should not be combined with other track bar relocation system Can be used with factory replacement adjustable track bars To be used with factory pitman arm for proper geometry Requires 17" diameter wheel or larger, with 4.75" backspacing or less
JKS Manufacturing?s Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3" and above, while providing correct geometry to increased droop travel. Bringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7/8? step bit. 3" tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.
Features:
- Provide better performing, solid steering feel.
- Flattens out steering angle when combined with 2" lift or more.
- 7/8" Step Drill Bit Included

Additional Fitment Information:

Vehicle
2016 - Jeep Wrangler JK

5 In Stock

$455.70 CAD

$546.84 CAD

Brand	JKS Manufacturing
Part #	J46JKS1210
Condition	New
Warehouse	B

2008 Jeep Wrangler JK Suspension Control Arm JKS Manufacturing

Adjustable Control Arms | Front Lower | Wrangler JK
Suggested Starting Length - 22.93" Min. Adjusted Length - 22.25" Max Adjusted Length - 24" *See Instructions for further details. Compatible with 0 to 6.0 in. suspension lift and OE attachment points.
Upgrade your Jeep Wrangler JK?s performance and reliability with JKS J-Flex adjustable front lower control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable. With heavy duty 1-1/4"-12 threads and hex shaped weld-in bungs, tightening of the included jam nuts is super easy and secure. At the non-adjustable end, factory style rubber bushings provide quiet, maintenance-free operation. Arms are powder-coated for a long-lasting finish. Sold in pairs.
In the box: Control Arms
Product Attributes:
- For Use With Lift Heights: 0-6"
- Vertical Position: Lower
- Horizontal Position: Front
- Is Adjustable: Yes
- Material: Steel
- Finish: E-coat
Features:
- Adjustable arm design utilizing a forged adjustable flex end and jam nut.
- Forged end is fully rebuildable and greaseable.
- 1-1/4"-12 threads provide ultimate strength and fine-tune adjustability.
- Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation.
- CNC formed for proper tire, frame and axle mount clearance.
Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!

Additional Fitment Information:

Vehicle
2008 - Jeep Wrangler JK

1 In Stock

$709.34 CAD

$851.21 CAD

Brand	JKS Manufacturing
Part #	J46JKS1610
Condition	New
Warehouse	B

2012 Jeep Wrangler JK Suspension Control Arm JKS Manufacturing

Adjustable Control Arms | Rear Upper | Wrangler JK
Suggested Starting Length - 17.63" Min. Adjusted Length - 17.375 "Max Adjusted Length - 19" *See Instructions for further details. Compatible with 0 to 6.0 in. suspension lift and OE attachment points.
Enhance your Wrangler JK Jeep?s off-road prowess and reliability with JKS J-Flex adjustable rear upper control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable. With heavy duty 1-1/4"-12 threads and hex shaped weld-in bungs, tightening of the included jam nuts is super easy and secure. At the non-adjustable end, factory style rubber bushings provide quiet, maintenance-free operation. Arms are powder-coated for a long-lasting finish. Sold in pairs.
In the box: Control Arms
Product Attributes:
- For Use With Lift Heights: 0-6"
- Vertical Position: Upper
- Is Adjustable: Yes
- orizontal Position: Rear
- Material: Steel
- Finish: E-coat
Features:
- Adjustable arm design utilizing a forged adjustable flex end and jam nut.
- Forged end is fully rebuildable and greaseable.
- 1"-14 threads provide ultimate strength and fine-tune adjustability.
- Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation.
- CNC formed for proper tire, frame and axle mount clearance.
Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!

Additional Fitment Information:

Vehicle
2012 - Jeep Wrangler JK

1 In Stock

$608.26 CAD

$729.91 CAD

Brand	JKS Manufacturing
Part #	J46JKS1665
Condition	New
Warehouse	B

1986 Jeep Comanche MJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links | Wrangler TJ with 0-2" Lift | Cherokee XJ, Comanche MJ & Grand Cherokee ZJ with 2-4" Lift
Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel. Not compatible with aftermarket sway bars.
Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 0-4"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 6-5/8 To 9-3/8
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Additional Fitment Information:

Vehicle
1986 - Jeep Comanche MJ

5 In Stock

$337.46 CAD

$404.95 CAD

Brand	JKS Manufacturing
Part #	J46JKS2000
Condition	New
Warehouse	B

1986 Jeep Comanche MJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler TJ, Cherokee XJ, Comanche MJ & Grand Cherokee ZJ
Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 2.5"-6"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Finish: E-coat
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Additional Fitment Information:

Vehicle
1986 - Jeep Comanche MJ

15 In Stock

$337.46 CAD

$404.95 CAD

Brand	JKS Manufacturing
Part #	J46JKS2001
Condition	New
Warehouse	B

2011 Jeep Wrangler JK Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links | 0"-2" Lift | Wrangler JK
Min. Adjusted Length - 5.625" Max Adjusted Length - 7.125" *See Instructions for further details. Not compatible with aftermarket swaybars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-2" lift. Get better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 0-2"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 5-1/2 To 7-1/8
- Type: Eye-eye
Features:
- Fits vehicles with 0"-2" Lift Only
- Gain 30 percent more axle articulation by disconnecting your front swaybar
- Also fits Wrangler JK right hand drive models
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler JK

10 In Stock

$337.46 CAD

$404.95 CAD

Brand	JKS Manufacturing
Part #	J46JKS2030
Condition	New
Warehouse	B

2018 Jeep Wrangler JK Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler JK
Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
JKS Quicker Disconnect sway bar end links fit Wrangler JK Jeeps with 0-6" lift. Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 2.5"-6"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Type: Eye-eye
- Finish: E-coat
Features:
- Fits vehicles with 2.5"-6.0" Lift Only
- Gain up to 30 percent more axle articulation by disconnecting your front sway bar
- Also fits Wrangler JK right hand drive models
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability

Additional Fitment Information:

Vehicle
2018 - Jeep Wrangler JK

17 In Stock

$306.79 CAD

$368.15 CAD

Brand	JKS Manufacturing
Part #	J46JKS2034
Condition	New
Warehouse	B

1985 Jeep Cherokee (XJ) Coil Spring Spacer JKS Manufacturing

JKS ACOS Adjustable Coil Spring Spacers
MJ Comanche: Installation may require minor vehicle modifications. Wrangler TJ: Compatible with Rubicon and Unlimited models. XJ Cherokee: Installation may require minor vehicle modifications.
Ride height adjustment has never been easier than with the Adjustable Coil Over Spacer (ACOS) for Jeep JT/XJ/ZJ. Whether you are adding clearance for larger tires, compensating for heavy accessories, or level out the vehicle at either corner, these fine threaded adjustable spacers provide convenient control of ride height without removing any suspension components. Front ride height can be adjusted safely between 1-3.5" and ACOS provides built-in bump stop extensions.
In the box: ACOS Adjustable Coil Spring Spacers
Product Attributes:
- Diameter: N/a
- Horizontal Position: Front
- Is Adjustable: Yes
- Height: 1-1/2" - 3-3/4"
- Material: Steel
Features:
- Compensates for uneven load distribution, spring settling, and sagging.
- Conveniently adjust ride height without removing any suspension components.
- Eliminates need to replace coil springs to accommodate future modifications.
- Instantly increases vehicle ride height upon installation for immediate benefits.
- New Dura-Thane isolators utilized to prevent noise transfer, and bump stops for durability.
- Technically advanced design and billet construction dramatically enhances suspension appearance.
Fine-tune the length and fit of your coil springs with Zone Offroad coil spring spacers and hardware such as retainers and coil spring alignment kits. Choose fixed spacers or JKS ACOS adjustable spacers.

Additional Fitment Information:

Vehicle
1985 - Jeep Cherokee (XJ)

13 In Stock

$528.17 CAD

$633.80 CAD

Brand	JKS Manufacturing
Part #	J46JKS2200
Condition	New
Warehouse	B

2002 Jeep Wrangler TJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Rear Adjustable Sway Bar Link | Wrangler TJ and LJ
Min. Adjusted Length - 8.75" Max Adjusted Length - 15" *See Instructions for further details. Requires Front 2.5" to 6" of Lift. Not compatible with aftermarket swaybars. Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle.
Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 2.5"-6"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 7 To 10-1/2
- Type: Eye-eye
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection

Additional Fitment Information:

Vehicle
2002 - Jeep Wrangler TJ

3 In Stock

$134.63 CAD

$161.56 CAD

Brand	JKS Manufacturing
Part #	J46JKS2942
Condition	New
Warehouse	B

2001 Jeep Grand Cherokee WJ Suspension Stabilizer Bar Link Kit JKS Manufacturing

Quicker Disconnect Sway Bar Links | 4"-6" Lift | Grand Cherokee WJ
Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
Install JKS Quicker Disconnect Sway Bar End Links on your 99-04 Jeep Grand Cherokee WJ for up to 30% more suspension articulation. Fits vehicles with 4" to 6" lift. Quick-release pins make it easy to decouple and reconnect your sway bar. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Sold in pairs. You won't find a better quick sway bar disconnect solution for your WJ.
In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
Product Attributes:
- For Use With Lift Heights: 4-6"
- Horizontal Position: Front
- Is Adjustable: Yes
- Length: 8 To 11-5/8
Features:
- Fits vehicles with 4"-6" Lift Only
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability