Proform Parts


Showing 1 - 10 of 276 products
Image
SKU
Product
Rating
Price

Proform
  • SB Chevy
  • Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
  • Sold Each
  • Product Attributes:
    • Rotation: Standard
    • Category: Mech. Water Pump
    • Feature/Benefit: Lightweight Aluminum
    • Length: Short
    • Applications: Chevy Small Block Engines
    • Flow Rate: 25 Gpm
    • Part Type: Water Pump
    • Tool Type: Piston Installation Tools
    • Make: Chevrolet
    • Material: Aluminum
    • Finish: Satin
  • PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!

Additional Fitment Information:
Vehicle Block CC Engine CID
1997 - Chevrolet C35 V - 8 Cyl 5.7L 350

Proform
  • SB Chevy
  • Mechanical Short Style High Flow Model SB Chevy Material: Aluminum Finish: Satin
  • Sold Each
  • Product Attributes:
    • Rotation: Standard
    • Category: Mech. Water Pump
    • Feature/Benefit: Lightweight Aluminum
    • Length: Short
    • Applications: Chevy Small Block Engines
    • Flow Rate: 25 Gpm
    • Part Type: Water Pump
    • Tool Type: Piston Installation Tools
    • Make: Chevrolet
    • Material: Aluminum
    • Finish: Satin
  • PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!

Additional Fitment Information:
Vehicle Block CC Engine CID
1997 - Chevrolet Suburban 1500 V - 8 Cyl 5.7L 350

Proform
  • Black
  • Aluminum; Black
  • Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
  • Product Attributes:
    • Emblem: Perfect Launch Emblem
    • Category: Differential Cover
    • Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
    • Applications: Ford 8.8
    • Part Type: Differential Cover
    • Tool Type: Piston Installation Tools
    • Material: Aluminum
    • Finish: Black
  • Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1991 - Ford Aerostar V - 6 Cyl 4.0L Base 245

Proform
  • Black
  • Aluminum Black
  • Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
  • Product Attributes:
    • Emblem: Perfect Launch Emblem
    • Category: Differential Cover
    • Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
    • Applications: Ford 8.8
    • Part Type: Differential Cover
    • Tool Type: Piston Installation Tools
    • Material: Aluminum
    • Finish: Black
  • Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Aspiration CID
2009 - Ford Ranger L - 4 Cyl 2.3L XL Naturally Aspirated 140

Proform
  • Black
  • 12 Bolt; Aluminum; Black
  • Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
  • Product Attributes:
    • Emblem: Perfect Launch Emblem
    • Category: Differential Covers
    • Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
    • Applications: Gm 12 Bolt, Passanger Car
    • Part Type: Differential Cover
    • Tool Type: Piston Installation Tools
    • Material: Aluminum
    • Finish: Black
  • Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Engine VIN Aspiration CID
1975 - Buick Century V 5733 8 Cyl 5.7L Base H Naturally Aspirated 350

Proform
  • Black
  • 12 Bolt Aluminum Black
  • Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
  • Product Attributes:
    • Emblem: Perfect Launch Emblem
    • Category: Differential Covers
    • Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
    • Applications: Gm 12 Bolt, Passanger Car
    • Part Type: Differential Cover
    • Tool Type: Piston Installation Tools
    • Material: Aluminum
    • Finish: Black
  • Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Engine VIN Aspiration CID
1983 - Buick Electra V - 8 Cyl 5.7L Limited N Naturally Aspirated 350

Proform
  • For Ford 289-302 Engine
  • HEI Distributor; Street/Strip; Built-In Coil; Black Cap; Housing Finish:Natural
  • Made From Billet Aluminum With Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Housing Finish: Natural
    • Voltage: 50,000 Volts
    • Distributor Cap Included: Yes
    • Grade Type: Performance
    • Number of Cylinders: 8
    • Length: 15
    • Connector Type: Sealed
    • Make: Ford
    • Gear Material: Cast Iron
    • Trigger Type: Magnetic
    • Advance Type: Mechanical And Vacuum
    • Category: Ford Hei Distributor
    • Marine Approved: No
    • Applications: Ford 289 To 302 5.0 Engines
    • Vacuum Advance: 13 Degrees
    • Ignition Box Required: No
    • Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
    • Shaft Material: Aluminum
    • Terminal Quantity: 8
    • Cap Color: Black
    • Rotor Rotation: Clockwise (right)
    • Ignition Rotor Included: Yes
    • Mechanical Advance: 22 Degrees
    • Ignition Coil Included: Yes
    • Coil Wire Included: Yes
    • Terminal Type: Lead Wire
    • Terminal Gender: Male
    • Shaft Length: 9.65
  • Features:
    • Street/strip distributor has a built-in coil and features a black cap.
  • This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - Ford E-150 Econoline Club Wagon V - 8 Cyl 5.0L 302

Proform
  • For Ford 289-302 Engine
  • HEI Distributor Street/Strip Built-In Coil Black Cap Housing Finish: Natural
  • Made From Billet Aluminum With Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Housing Finish: Natural
    • Voltage: 50,000 Volts
    • Distributor Cap Included: Yes
    • Grade Type: Performance
    • Number of Cylinders: 8
    • Length: 15
    • Connector Type: Sealed
    • Make: Ford
    • Gear Material: Cast Iron
    • Trigger Type: Magnetic
    • Advance Type: Mechanical And Vacuum
    • Category: Ford Hei Distributor
    • Marine Approved: No
    • Applications: Ford 289 To 302 5.0 Engines
    • Vacuum Advance: 13 Degrees
    • Ignition Box Required: No
    • Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
    • Shaft Material: Aluminum
    • Terminal Quantity: 8
    • Cap Color: Black
    • Rotor Rotation: Clockwise (right)
    • Ignition Rotor Included: Yes
    • Mechanical Advance: 22 Degrees
    • Ignition Coil Included: Yes
    • Coil Wire Included: Yes
    • Terminal Type: Lead Wire
    • Terminal Gender: Male
    • Shaft Length: 9.65
  • Features:
    • Street/strip distributor has a built-in coil and features a black cap.
  • This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Ford F-150 V - 8 Cyl 5.0L 302

Proform
  • For Ford 351M, 351C-460 Engine
  • HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
  • Comes With An Iron Gear and With Not Work With Factory Roller Cams
  • Product Attributes:
    • Rotation: Standard
    • Housing Finish:
      • Natural
      • Painted
    • Voltage: 50,000 Volts
    • Distributor Cap Included: Yes
    • Grade Type: Performance
    • Number of Cylinders: 8
    • Shaft Color: Polished
    • Length: 15
    • Connector Type: Sealed
    • Make: Ford
    • Gear Material: Cast Iron
    • Trigger Type: Magnetic
    • Advance Type: Mechanical And Vacuum
    • Operation Type: Standard
    • Category: Ford Hei Distributor
    • Marine Approved: No
    • Applications: Ford 351c To 460 Engines
    • Vacuum Advance: 13 Degrees
    • Ignition Box Required: No
    • Feature/Benefit: Fits Ford 351m, 351c - 460 Engines.
    • Shaft Material: Aluminum
    • Terminal Quantity: 8
    • Cap Color: Blue
    • Rotor Rotation: Clockwise (right)
    • Ignition Rotor Included: Yes
    • Distributor Gear Included: No
    • Mechanical Advance: 22 Degrees
    • Technical Note: Gear Not Compatible With Roller Cams
    • Housing Color: Blue
    • Ignition Coil Included: Yes
    • Coil Wire Included: Yes
    • Terminal Type: Lead Wire
    • Terminal Gender: Male
    • Ignition Module Included: Yes
    • Shaft Length: 9.65
  • Features:
    • Fits Ford 351M, 351C - 460 Engines.
  • Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.

Additional Fitment Information:
Vehicle Block CC Engine CID
1980 - Ford E-250 Econoline V - 8 Cyl 7.5L 460

Proform
  • w/Seal
  • OEM Style;w/Seal; Mounting Bolt(s) Included:No; Material:Die Cast Aluminum; Finish:Natural
  • Sold Each
  • Product Attributes:
    • Category: Timing Chain Covers
    • Feature/Benefit: This Die-cast Timing Chain Cover Is 100% New And Optimizes The Oem Design, And Will Accommodate Double Roller Timing Chains.
    • Applications: Buick 400 To 430 To 455 Engines 1967 To 1976
    • Tool Type: Piston Installation Tools
    • Mounting Bolt(s) Included: No
    • Make: Buick
    • Material: Die Cast Aluminum
    • Finish: Natural
  • This die-cast timing chain cover is 100% new and optimizes the OEM design, and will accommodate double roller timing chains. Crankshaft oil seal included. Compare our price versus the competition!

Additional Fitment Information:
Vehicle Block CC Engine CID
1969 - Buick GS 400 V - 8 Cyl 6.6L 400
Showing 1 - 10 of 276 products

Loading...