1997 Bilstein Parts


Showing 1 - 10 of 251 products
Image
SKU
Product
Rating
Price

Bilstein
  • B8 6112 - Suspension Kit
  • Front Lift Height: 0-2.4"
  • Front Suspension Kit
  • B8 6112
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Reservoir: No
    • Body Design: Snap Ring Grooved Body (coilover)
    • Body Diameter (ID): 60mm
    • Spring Seat Included: Yes
  • Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

This Part Fits the Following OEM/Substitute Numbers:
47-267558

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Body Drive Type CID
1997 - Toyota Tacoma V 3378 Front 6 Cyl 3.4L Base Extended Cab Pickup 4WD -

Bilstein
  • B6 4600-Shock Absorber
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Eye 14.4mm
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: Blue Straight
    • Lower Mount Type: Eye 14.4mm
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
084725, 24184854, 324543, 52039481AA, 52039481AB, 52039481AD, 52039484AA, 52106080AA, 52106080AC, 52106082AA, 52106082AB, 52106093AA, 52106381AB, 52106381AE, 52106383AE, 52106385AE, 52106496AA, 52106496AE...VIEW MORE

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
1997 - Dodge Ram 3500 Rear Base RWD

Bilstein
  • B8 5100-Shock Absorber
  • For Rear Lifted Height: 4"
  • 46mm Monotube Shock Absorber
  • B8 5100
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 16.950 In.
      • 430.5mm
    • Upper Mount Type: Eye 14.4mm
    • Extended Length (MM): 695.0
    • Reservoir: No
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Smooth Body (non-coilover)
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 430.5
    • Boot Included: Black Bellows
    • Lower Mount Type: Eye 14.4mm
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 27.360 In.
      • 695mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein 5100 Series
    • Monotube Gas Pressure Construction
    • Designed For Consistent Fade-Free Performance
    • Self-Adjusting Deflective Disc Valving
    • High-Flow Piston Reduces Harshness
    • Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
    • Zinc Coating For Resistance To Off-Road Elements
    • Custom Valving Available
    • Factory Rebuildable
    • Made In The USA
  • Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
24191203, 930560, BE5-6647, F4-BE5-6647-H1

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
1997 - Dodge Ram 1500 Rear ST 4WD

Bilstein
  • B8 5100-Shock Absorber
  • For Rear Lifted Height: 0-1"
  • 46mm Monotube Shock Absorber
  • B8 5100
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 16.160 In.
      • 410.5mm
    • Upper Mount Type: Eye 14.4mm
    • Extended Length (MM): 664.0
    • Reservoir: No
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Smooth Body (non-coilover)
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 410.5
    • Boot Included: Black Bellows
    • Lower Mount Type: Eye 14.4mm
    • Shock Stroke: 9.980 In.
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 26.140 In.
      • 664mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein 5100 Series
    • Monotube Gas Pressure Construction
    • Designed For Consistent Fade-Free Performance
    • Self-Adjusting Deflective Disc Valving
    • High-Flow Piston Reduces Harshness
    • Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
    • Zinc Coating For Resistance To Off-Road Elements
    • Custom Valving Available
    • Factory Rebuildable
    • Made In The USA
  • Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
217805, 24185783, BE5-6682, F4-BE5-6682-H6, F4-BE5-6682-H7, F4-BE5-6682-H8

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
1997 - Dodge Ram 3500 Rear Base 4WD

Bilstein
  • B6 4600-Shock Absorber
  • Without Solid Front Axle
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Stem
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: Blue Straight
    • Lower Mount Type: Eye 14.4mm
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
084724, 24184847, 314553, 4897443AB, 4897443AD, 4897458AA, 4897458AB, 5017167AA, 5017167AC, 914553, B46-1907, F4-B46-1907-H1, RS5195, RS999195

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
1997 - Dodge Ram 1500 Front Laramie RWD

Bilstein
  • B8 5160-Shock Absorber
  • For Rear Lifted Height: 0-2"
  • 46mm Monotube Shock Absorber
  • B8 5160
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 16.540 In.
      • 420mm
    • Internal Design: Monotube
    • Upper Mount Type: Eye 14.4mm
    • Extended Length (MM): 713.5
    • Reservoir: Yes
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Smooth Body (non-coilover)
    • Billet Reservoir Clamp Included: No
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: Yes
    • Optional Reservoir Clamp: 11-176015
    • Collapsed Length (MM): 420.0
    • Boot Included: No
    • Lower Mount Type: Eye 14.4mm
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 28.090 In.
      • 713.5mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein 5160 Series Stock Mount Remote Reservoir
    • Direct-Fit To Each Specific Vehicle Application
    • Monotube Gas Pressure Construction
    • Remote Reservoir Allows For Greater Heat Dissipation
    • Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
    • Zinc Coating For Resistance To Off-Road Elements
    • Custom Valving Available
    • Factory Rebuildable
    • Made In The USA
  • Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
25187601, 385599, BR5-G695, F4-BR5-G695-H0

Additional Fitment Information:
Vehicle Position Sub Model Body Drive Type
1997 - Dodge Ram 3500 Rear Base Standard Cab Pickup 4WD

Bilstein
  • 36mm Monotube Steering Damper
  • B6 (Steering Damper)
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Lower Mount Type: Cantilever
    • Upper Mount Type: Stem
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Bilstein B6 HD
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Durability And Performance
    • Vehicle Specific Ride Tuning
  • Bilstein B6 (Steering Damper) is designed as an upgrade to factory steering dampers on passenger cars and vans. Utilizing our proven monotube design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are finished in the classic Bilstein yellow paint to match all B6 series products. B6 (Steering Damper) will offer a significant improvement in steering, handling and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
182045, 24026451, BE3-2645, F4-BE3-2645-H0

Additional Fitment Information:
Vehicle Position Sub Model
1997 - GMC P3500 Front Base

Bilstein
  • 46mm Monotube Steering Damper
  • B8 5100 (Steering Damper)
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 13.110 In.
      • 333mm
    • Upper Mount Type: Eye 12mm
    • Extended Length (MM): 524.0
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Body Design: 46mm Id Smooth Body (non-coilover)
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 333.0
    • Boot Included: Black Bellows
    • Lower Mount Type: Eye 12mm
    • Extended Length:
      • 20.630 In.
      • 524mm
  • Features:
    • Bilstein 5100 Series Steering Stabilizers
    • Precise Steering Damping
    • Digressive Valving
    • Reduce Vibration
    • Designed Specifically To Replace Vehicles OE Stabilizer
    • Easy Installation
    • Zinc-Plated Steel Body
  • Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.

This Part Fits the Following OEM/Substitute Numbers:
24174534, 385516, BE5-H453, F4-BE5-H453-H0

Additional Fitment Information:
Vehicle Position Sub Model
1997 - Ford E-350 Econoline Club Wagon Front XL HD

Bilstein
  • B6 4600-Shock Absorber
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Stem
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: No
    • Lower Mount Type: Bar Pin
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
12474687, 12474688, 12474908, 15056363, 151163, 24-013079, 24187428, 313515, 913515, B46-1307, BE5-G594, F4-BE5-G594-H0, RS5222

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
1997 - Chevrolet Blazer Front LS RWD

Bilstein
  • B6 4600-Shock Absorber
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Stem
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: Blue Bellows
    • Lower Mount Type: Eye 12.1mm
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
141626, 24185233, 314515, 4883072AB, 4883072AC, 4883072AD, 4883073AB, 4883073AC, 4883073AD, 4897393AG, 4897393AH, 5015442AA, 5015442AD, 5016354AB, 914515, BE5-2617, F4-BE5-2617-H0, F4-BE5-2617-H1...VIEW MORE

Additional Fitment Information:
Vehicle Position Front Spring Sub Model Drive Type
1997 - Dodge Dakota Front Torsion Bar Base 4WD
Showing 1 - 10 of 251 products

Loading...