1994 Electrical, Charging and Starting Parts


Showing 1 - 10 of 1717 products
Image
SKU
Product
Rating
Price

Powermaster
  • Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount
  • XS Torque Starter; Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount;
  • XS Torque Starter
  • Product Attributes:
    • Style: Oe
  • Features:
    • Clears Most Headers and Oil Pans
    • No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
    • Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
    • The Lightest 200ft.lb Starter Available
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster XS Torque Starters Are Rated Up to 18:1 Compression With A 4.4:1 Gear Reduction And Up to 1.8HP. The XS Torque Is The Lightest 200 Ft-Lbs Of Torque Starter. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C1500 V - 6 Cyl 4.3L 262

Proform
  • High-Torque Starter; Gear Reduction Type; Stagger Bolt; Fits Chevy V8-V6 Engines
  • High-Torque Starter; Stagger Bolt; Compression Ratio:10 : 1; Finish:Silver/Black; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.7 Kilo Watts
  • High-Torque Starter; Gear Reduction Type; Hitachi Style; Staggered Mount Type; Fits Chevy V8 Engines; Cast Aluminum Mount; For 10.1:1 Compression Ratio Engines; 100% New Components; Natural Finish;
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio: 3.75:1
    • Feature/Benefit: High-torque, Gear-reduction Design.
    • Compression Ratio: 10 : 1
    • Part Type: Starter Motor
    • Make: Chevrolet
    • Category: Starters
    • Power Output: 1.7 Kilo Watts
    • Mounting Plate: Staggered Bolt Mounting Plate
    • Applications: Chevy Small Block Engines And Chevy Big Block Engines
    • Flywheel Tooth Number: 168-tooth
    • Weight: 8.3 Lbs.
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Cadillac Fleetwood V - 8 Cyl 5.7L 350

Proform
  • High-Torque Starter; Gear Reduction Type; Lightweight; Chrysler SB&BB V8 Engines
  • High-Torque Starter; Gear Reduction Type; Lightweight; Compression Ratio:14 : 1; Finish:Natural; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:2-Bolt
  • High-Torque Mini Starter; Gear Reduction Type; Lightweight Style; Fits Chrysler A, B, RB, & HEMI V8 Engines; Cast Aluminum Mount; 14:1 Max Compression Ratio; 100% New Components; Offset Design for More Oil Pan Clearance; Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio: 4.41:1
    • Category: Starters
    • Feature/Benefit: 4.41-to-1 Sealed Gear-reduction Drive And Full Ball Bearing Construction.
    • Applications: Chrysler Engines And Chrysler V6 Engines
    • Compression Ratio: 14 : 1
    • Mounting Plate: 2-bolt
    • Part Type: Starter Motor
    • Make: Chrysler
  • High-torque, gear-reduction design. 100% NEW, not rebuilt. The high-torque, high-output motor spins the engine over faster than stock starters, delivering more cranking power. 4.41-to-1 sealed gear-reduction drive and full ball bearing construction.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Dodge B250 V - 8 Cyl 5.9L 360

Proform
  • High-Torque Starter; Gear Reduction Type; High Compression; Chevy V8; 168 Tooth
  • High-Torque Starter; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.9 Kilo Watts
  • High-Torque Mini Starter; Gear Reduction Type; High Compression Racing Staggered Style; Fits All Chevy V8 Engines with 168 Tooth Flywheel; Staggered Mount; For 14:1 Compression Ratio; 100% New; Offset For Pan Clearance; Natural Finish
  • Product Attributes:
    • Rotation: Standard
    • Gear Reduction Ratio: 4.41:1
    • Category: Starters
    • Power Output: 1.9 Kilo Watts
    • Feature/Benefit: For Engines With Monster Cubic Inches Or Compression Ratios, These 100% New Starters Challenge The Specifications, Durability, And Reliability Of Anything On The Market.
    • Applications: Chevy Small Block Engines And Chevy Big Block Engines
    • Compression Ratio: 14 : 1
    • Mounting Plate: Staggered Bolt Mounting Plate
    • Part Type: Starter Motor
    • Flywheel Tooth Number: 168-tooth
    • Make: Chevrolet
  • For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression. Comes in the NEW Race Box Packaging! Fits Chevy small and big block engines. Fits Chevy V8.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C3500 V - 8 Cyl 7.4L 454

Powermaster
  • Ford Upgrade; 150 Amp; 100 Idle; 6 Groove Pulley; 1 Wire; Black
  • Alternator; Ford Upgrade; 150 Amp; 100 Idle; 6 Groove Pulley; 1 Wire; Black;
  • Alternator
  • Product Attributes:
    • Amperage: 150 Amp
  • Features:
    • Easy Bolt-On To Upgrade Early Models
    • 150 Plus Amps At Top End/100 Plus Amps At Idle
    • Easy To Install 1-Wire Internally Regulated
    • Individually Dyno Tested with Proof of Performance Guarantee
    • High Output Upgrade For Lower Amp Units
    • Ultimate Custom Look With Tear Drop Design
  • Powermaster has a variety of alternators available for various applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Ford Bronco V - 8 Cyl 5.0L 302

Powermaster
  • CS130; Offset Left; Rear Battery Post; 140 Amp; 95 Idle; 6 Groove Pulley; Natural
  • Alternator; CS130; Offset Left; Rear Battery Post; 140 Amp; 95 Idle; 6 Groove Pulley; Natural;
  • Alternator
  • Product Attributes:
    • Amperage: 140 Amp
  • Features:
    • Highly Efficient Small Case Alternator
    • 140 Plus Amps At Top End/95 Plus Amps At Idle
    • One Unit For 1 Or 3 Wire Operation
    • Individually Dyno Tested with Proof of Performance Guarantee
    • High Output Replacement For Lower Amp Units
    • Smooth Back Design
  • Powermaster has a variety of alternators available for various applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C3500 V - 8 Cyl 6.5L 395

Powermaster
  • CS130; Offset Left; Rear Battery Post; 105 Amp; 85 Idle; 6 Groove Pulley; Chrome
  • Alternator; CS130; Offset Left; Rear Battery Post; 105 Amp; 85 Idle; 6 Groove Pulley; Chrome;
  • Alternator
  • Product Attributes:
    • Amperage: 105 Amp
  • Features:
    • Highly Efficient Small Case Alternator
    • 105 Plus Amps At Top End/85 Plus Amps At Idle
    • One Unit For 1 Or 3 Wire Operation
    • Individually Dyno Tested with Proof of Performance Guarantee
    • Great Upgrade To Replace Lower Amp Units
    • Smooth Back Design
  • Powermaster has a variety of alternators available for various applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet Blazer V - 8 Cyl 6.5L 395

Powermaster
  • 153/168 Tooth Flywheel; 190 ft./lb. Torque; 16:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount; Natural Finish
  • PowerMax Plus Starter; 153/168 Tooth Flywheel; 190 ft./lb. Torque; 16:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount; Natural Finish;
  • PowerMax Plus Starter
  • Product Attributes:
    • Style: Oe
  • Features:
    • Hitachi Style PE106 Replacement
    • Clears Most Headers and Oil Pans
    • Can Be Inverted w/Solenoid Down
    • 4 Position Rotation
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster PowerMAX Plus Starter. PE106 Hitachi Style Replacement. 1.8kw/2.5HP Rated up to 16:1 Compression with 180 Ft-Lbs of Cranking Torque and a 3.7:1 Gear Reduction. Billet Aluminum Mounting Block with 4 Position Rotation. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet Blazer V - 8 Cyl 5.7L 350

Powermaster
  • 180 ft./lb. Torque; 14:1 Compression Rate; 3:25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish
  • Mastertorque Starter; 180 ft./lb. Torque; 14:1 Compression Rate; 3:25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish;
  • Mastertorque Starter
  • Product Attributes:
    • Style: Oe
  • Features:
    • Clears Most Headers and Oil Pans
    • No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
    • Durable Black Wrinkle Finish
    • Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Ford F-350 V - 8 Cyl 7.5L 460

Powermaster
  • Standard; 157 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Ratio; 4.5:1 Gear Reduction; 3/4in. Offset
  • Ultra Torque Starter; Standard; 157 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Ratio; 4.5:1 Gear Reduction; 3/4in. Offset;
  • Ultra Torque Starter
  • Product Attributes:
    • Style: Oe
  • Features:
    • 2.5 KW/3.4 HP
    • Up to 18:1 Compression
    • Cranking Power For Over 18:1 Compression
    • Can Be Inverted w/Solenoid Down
    • 5 Position Rotation
    • Great for Big Cubic Inch Engines
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 5 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Ford F-250 V - 8 Cyl 5.0L 302
Showing 1 - 10 of 1717 products

Loading...