1986 Volkswagen Vanagon Engine Oil Cooler Hose Assembly - Upper Meyle

This fit as expected. The rubber is actually a little thicker than stock. I had one side that was difficult to seat but that was due to the pipe not the hose. It has the exact same measurements as stock. I replaced the stock hose clamps for the screw kind and no leaks with the switch either.If you are removing yours note that the pipe connected to the block gets hot enough that if you have an air pocket it will melt the old one and can be a real pain to remove. I ended up scraping bits of it off.

This was about $100 cheaper than the dealer part, and after 6 months or so, it's still going strong. Easy installation, perfectly sized and a great deal!