2013 Subaru Impreza Exhaust System Kit Parts


Showing 1 - 10 of 20 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Quad Split Rear Exit
  • Competition Series Stainless Cat-Back System
  • Competition Series Stainless Cat-Back System
  • Product Attributes:
    • Main Piping Diameter: 3
    • Muffler Type: Straight-through
    • Tip Diameter: 4
    • Muffler Finish: Satin
    • Tip Finish: Polished
    • Tip Shape: Round
    • Exit Style: Quad Split Rear
    • Tip Length: 12.875
    • Tip Type: Welded;double Wall;angle Cut;folded Edge
    • Inlet Connection Type: Bolt-on
    • Subtitle: Cat-back

Additional Fitment Information:
Vehicle Block CC Engine Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L Sedan -

Borla
  • 2 in. Pipe Diameter/3.19 x 5 in. Single Round Rolled Angel Cut Tip; Single Right Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
  • S-Type Axle-Back Exhaust System; 2 in. Pipe Diameter/3.19 x 5 in. Single Round Rolled Angel Cut Tip; Single Right Rear Exit;
  • S-Type Axle-Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.000 In.
    • Tubing Diameter: 2.000 In.
    • Exhaust Type: Axle-back
    • Exit Position: Single Rear
    • WARNING CA Proposition 65: Yes
    • Inlet Inside Diameter: 2.000 In.
  • Features:
    • Made From High-Quality T-304 Austenitic Stainless Steel
    • Mandrel Bent Pipes
    • Ensures Consistent Diameter Through Each Curve
    • Mufflers Have No Baffles/Chambers
    • Produces High Velocity
    • Million Mile Warranty
  • A Borla 'Axle Back' or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2013 - Subaru Impreza H 1995 4 Cyl 2.0L Sport Limited -

MagnaFlow Performance Exhaust
  • Quad Split Rear Exit
  • Competition Series Stainless Cat-Back System
  • Competition Series Stainless Cat-Back System

Additional Fitment Information:
Vehicle Block CC Engine Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L Sedan -

MBRP Exhaust
  • 2.5 in.; Dual Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;Meets EPA Standards
  • Armor Pro Axle Back Exhaust System; 2.5 in.; Dual Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
  • Armor Pro Axle Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Axle-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MBRP Exhaust
  • 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;Meets EPA Standards
  • Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
  • Armor Pro Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MBRP Exhaust
  • 3 in.; Quad Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;Meets EPA Standards
  • Armor Pro Cat Back Exhaust System; 3 in.; Quad Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last];
  • Armor Pro Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat-back
    • Exit Position:
      • Dual Split Rear
      • Quad Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
    • Inlet Inside Diameter: 3.000 In. - 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MBRP Exhaust
  • Armor Pro Axle Back Exhaust System
  • 2.5 in.; Dual Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last]
  • Armor Pro Axle Back Exhaust System; 2.5 in.; Dual Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
  • Pro Series Axle Back Exhaust System
  • Product Attributes:
    • Tail Pipe Diameter: 2.500 In.
    • Tubing Diameter: 2.500 In.
    • Exhaust Type: Axle-back
    • Exit Position: Dual Split Rear
    • Tip Diameter: 2.500 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Inside Diameter: 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MBRP Exhaust
  • Armor Pro Cat Back Exhaust System
  • 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last]
  • Armor Pro Cat Back Exhaust System; 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Race Version; Includes 3.5 in. OD Dual Out Carbon Fiber Tips;
  • Pro Series Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat-back
    • Exit Position: Dual Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MBRP Exhaust
  • Armor Pro Cat Back Exhaust System
  • 3 in.; Dual Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last]
  • Armor Pro Cat Back Exhaust System; 3 in.; Quad Split Rear Exit; T304 Stainless Steel; Includes 3.5 in. OD Dual Out Carbon Fiber Tips; [Available While Supplies Last];
  • Pro Series Cat Back Exhaust System
  • Product Attributes:
    • Exhaust Type: Cat-back
    • Exit Position:
      • Dual Split Rear
      • Quad Split Rear
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
      • Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Inside Diameter: 3.000 In. - 2.500 In.
  • Features:
    • Improved Torque And Horsepower
    • Lower Exhaust Gas Temperatures
    • Increased Throttle Response
    • Mellow Exhaust Note
    • Bolt On Design
    • Utilizes OEM Hangers
    • Stainless Steel Tips Are Included
    • Lifetime Warranty
  • THE ONLY EXHAUST YOU'LL EVER NEED - MBRP ARMOR PRO Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It's the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX Premium Sedan -

MagnaFlow Performance Exhaust
  • Quad Split Rear Exit
  • Street Series Stainless Cat-Back System
  • Street Series Stainless Cat-Back System

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Body CID
2013 - Subaru Impreza H 2458 4 Cyl 2.5L WRX STI Hatchback -
Showing 1 - 10 of 20 products

Loading...