GMC C15/C1500 Pickup Parts

Choose a Year for your GMC C15/C1500 Pickup


Showing 1 - 10 of 1925 products
Image
SKU
Product
Rating
Price

Moog
  • Coil Spring Set
  • Constant Rate Spring
  • MOOG 6454 Coil Spring Set
  • Product Attributes:
    • Rear Spring Relaxed Length:
      • 13.61
      • 345.70
    • Wire Diameter:
      • 0.82
      • 21.00
    • Front Spring Compressed Length:
      • 10.00
      • 254.00
    • Rear Spring Compressed Length:
      • 10.00
      • 254.00
    • Front Spring Outside Diameter: 5.340
    • Front Spring Relaxed Length:
      • 13.61
      • 345.70
    • Rear Spring Outside Diameter: 5.340
  • Features:
    • 100% Load tested
    • Easy to install
    • Provides like-new steering
    • Designed to lower stresses for longer service life
    • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
  • By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:
277-2074, 328098, 328099, 328100, 328101, 45H0076, 52049830, 585-1076, 630.66078, 831-6454, 92-6454, CS6454, FCS6454S, SMS6454, U6454P

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1973 - GMC C15/C1500 Pickup V - Front 8 Cyl 7.4L 454

Moog
  • Coil Spring Set
  • Heavy Duty Constant Rate Spring
  • MOOG 6454 Coil Spring Set
  • Product Attributes:
    • Rear Spring Relaxed Length:
      • 13.61
      • 345.70
    • Wire Diameter:
      • 0.82
      • 21.00
    • Front Spring Compressed Length:
      • 10.00
      • 254.00
    • Rear Spring Compressed Length:
      • 10.00
      • 254.00
    • Front Spring Outside Diameter: 5.340
    • Front Spring Relaxed Length:
      • 13.61
      • 345.70
    • Rear Spring Outside Diameter: 5.340
  • Features:
    • 100% Load tested
    • Easy to install
    • Provides like-new steering
    • Designed to lower stresses for longer service life
    • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
  • By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1973 - GMC C15/C1500 Pickup L 4097 Front 6 Cyl 4.1L 250

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
1974 - GMC C15/C1500 Pickup Front Inner 4 X 2

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Standard Brakes
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
1970 - GMC C15/C1500 Pickup Front Inner 4 X 2

Trico
  • 16" TRICO Exact Fit Wiper Blade
  • 9mm Hook, 3/16" Side Lock, 7mm Bayonet
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
1973 - GMC C15/C1500 Pickup Front

Champion
  • Champion Copper Plus- Boxed - RN12YC
  • 3/4in Reach Spark Plugs Resistor Type Gap 0.035in ; Plug Type RN12YC
  • Champion Copper Plus 404 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Hex Size:
      • 0.813
      • 20.650
    • Reach: 0.75
    • Center Electrode Tip Material: Nickel
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Classification: Champion Copper Plus
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.12
    • Plug Type: Rn12yc
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
14GR42, 4091713, 4218, 4219, 4220, 5213693, 7507837, 7905, 7922, 8008, 9007, 93206675, 93230927, AGR32C, AGR42, AGR42C, AGR52, AGS32C...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1968 - GMC C15/C1500 Pickup V 5012 6 Cyl 5.0L 305

Champion
  • Champion Copper Plus- Boxed - RN12YC
  • 3/4in Reach Spark Plugs Resistor Type Gap 0.040in ; Plug Type RN12YC
  • Champion Copper Plus 404 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Hex Size:
      • 0.813
      • 20.650
    • Reach: 0.75
    • Center Electrode Tip Material: Nickel
    • Seat Type: Flat
    • Electrical Terminal Type: Non-removable Nut
    • Pre-Gap Size:
      • 0.035
      • 0.89
    • Classification: Champion Copper Plus
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.12
    • Plug Type: Rn12yc
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine CID
1968 - GMC C15/C1500 Pickup V 5753 351E 6 Cyl 5.7L 351

CURT
  • Class 3 Hitch; 2in. Receiver; Select Ford; Chevrolet; GMC C/K (Drilling Required
  • 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~For Models w/34 in. Frame Spacing~For Models w/o 10 in. Step Bumper~Drilling Required~Visibility: Concealed~Install Time 60 Minutes
  • CURT 13028 Class 3 Trailer Hitch; 2-Inch Receiver; Drilling Required; Fits Select Ford; Chevrolet; GMC C/K Pickup Trucks
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 6000 Lbs.
    • Visibility: Concealed
    • Weight Carrying Capacity: 6000
    • Body Shape: Square
    • WD Tongue Weight: 1000
    • Install Time: 60 Minutes
    • WC Tongue Weight: 600
    • Weight Distribution: 10000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 3500, C30, C3500, C3500HD, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty, F550 Super Duty, GMC C3500, C3500HD and K3500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1970 - GMC C15/C1500 Pickup V 6588 Rear 8 Cyl 6.6L 402
Showing 1 - 10 of 1925 products

Loading...