1963 Pontiac Grand Prix Distributor MSD

  • Features:
    • Simple and clean three wire installation
    • CARB E.O. Approved
    • Does not require an MSD Ignition Control
    • Mech. advance assem. can be locked out for crank trigger systems
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • Vacuum advance canister for improved economy (can be locked out)
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Includes built-in Rev Limiter
  • Do yourself and your Poncho a favor and replace your points distributor with a Ready-to-Run model. Youll never have to adjust or replace the points again and your car will run better thanks to the hot MSD sparks. Inside the CNC-machined billet housing there is an ignition module that produces a much hotter spark which will improve the performance of your engine. Also, since timing advance is important to Pontiac engines, the mechanical advance can easily be adjusted with the supplied advance springs and stop bushings. Plus, theres a vacuum advance canister to help economy at moderate cruise speeds. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engines specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The Distributor is supplied with the MSD Cap, Race Rotor, wire retainer and gear.

Additional Fitment Information:
Vehicle
1963 Pontiac Grand Prix
Brand MSD
Part # M468528
Condition New
Warehouse B

MSD

  • Iron Gear;CARB E.O. D-40-39
  • Ready-To-Run Distributor; Iron Gear;
  • Ready-To-Run Distributor
  • General

    Distributor Type
    Ready To Run
    WARNING CA Proposition 65
    Yes
    WARNING CA Proposition 65 Message
    Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    Engine Make/Size
    Oe

    Packaging

    package quantity
    1
    weight
    4.75 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Steve Denning
      30 Jan, 2015
      great product for marine use
    2. Edward Sharp
      24 Nov, 2014
      I received this product, from the manufacturer, damaged. I immediately sent an email to AutoPartsWAY who had a new shipped to me before I even mailed the old one back to the company. The new one worked great.
    3. diana ferrer
      17 Aug, 2014
      excelente
    4. Eric B.
      06 Aug, 2014
      Nice distributor. Will work nicely on the new motor.
    5. Silvana N.
      22 Jul, 2014
      perfect
    6. bigdaddy
      28 Aug, 2013
      This Distributor also fits a 92-93 F150xlt 302 4x4. Direct fit just plug in and go awesome product rely makes a difference
    7. R. Marten
      03 May, 2013
      This distributor was installed in a 1949 Ford V8 original flathead along with a new coil, wires, plugs, Holley 4 barrel carb and electric fuel pump. The engine starts SO easy and runs strong. The distributor installed very easy, instructions great. Engine timing was not a problem.I did initially have a poor connection from ignition switch to coil, which caused it not to start. You need to make sure you have 12 volts at coil not only initially, but also when engine is cranking - the distributor needs a lot more current flow than the original points/distributor/coil setup.
    8. TD Tech
      04 Mar, 2013
      Direct bolt on improvement in replacing the original Ford distributor. According to MSD this is for 94-95 Mustang 5.0L only but it is also an unstated direct replacement for 91-93 Thunderbird/Cougar.
    9. williewiskers
      11 Jan, 2013
      read title nothing more to say... ... ... .. ... ... .. ... . .. .. . . . . .
    10. Bryan
      16 Jan, 2012
      Very nice quality item. Installed as per complete instructions. Kit was missing three mounting bolts. Car runs well however it is early in the process. I am happy! Shipping was free from AutoPartsWAY and quick.

    Loading...