1999 Ford Ranger Suspension Lift Kit 6 Cyl 3.0L MaxTrac

  • Features:
    • Provide Additional Clearance For Your Vehicle
    • Allowing A Larger Tire Size
    • Made In The USA
  • The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory coil spring with a lifted coil spring and Maxtrac twin-tube shocks to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
1999 Ford Ranger V 2986 6 Cyl 3.0L XL RWD 182
Brand MaxTrac
Part # MAXK883063A-6
Condition New
Warehouse B

MaxTrac

  • 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles And Coil Springs/Rear Blocks/U-Bolts/Rear MaxTrac Shocks; Supersedes PN[K883053-6] For Non Stabilitrak Models
  • Suspension Lift Kit w/Shocks; 6 in. Front Lift; 3 in. Rear Lift; Includes Front Lift Spindles And Coil Springs/Rear Blocks/U-Bolts/Rear MaxTrac Shocks; Supersedes PN[K883053-6];
  • Suspension Lift Kit w/Shocks
  • General

    Lift/Drop Height
    • 3 In.
    • 6 In.
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.

    Loading...