1990 Chevrolet Camaro Transmission Parts

Choose your Part Name for your 1990 Chevrolet Camaro

Showing 1 - 10 of 63 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1990 Chevrolet Camaro Manual Transmission Input Shaft Bearing - Front Timken

Tapered Roller Bearing Cone and Cup Assembly
Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Trans Type	Transmission	Position	Trans. Speed
1990 - Chevrolet Camaro	Transmission	Manual	Front	5

1 In Stock

$26.40 CAD

$31.68 CAD

Brand	Timken
Part #	TIMSET5
Condition	New
Warehouse	B

UPC: 053893730387

1990 Chevrolet Camaro Transmission Oil Pan Gasket FelPro

Automatic Transmission Gasket
FEL-PRO TOS 18663 Automatic Transmission Gasket
Product Attributes:
- Configuration: One Piece
- Length: 13.125
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:

30157, 7432669, 749014-PO, 76-3043, 8642360, 8654799, GB12866, W39365, W39365TC

Additional Fitment Information:

Vehicle	Transmission	Trans. Speed	Transmission Manuf. Code
1990 - Chevrolet Camaro	Automatic	4	THM700-R4/4L60/MD8

2 In Stock

$15.92 CAD

$19.10 CAD

Brand	FelPro
Part #	F10TOS 18663
Condition	New
Warehouse	B

UPC: 084113694301

1990 Chevrolet Camaro Clutch Release Bearing 6 Cyl 3.1L Centerforce

Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
Flat Face; 0.665 in. Height; 2.740 in. Major Outside Diameter; 1.380 in. Inside Diameter; Groove Retension
Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Throwout Bearing
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Throwout Bearing
Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1990 - Chevrolet Camaro	V	-	6 Cyl 3.1L	189

12 In Stock

$91.55 CAD

$109.86 CAD

Brand	Centerforce
Part #	C78N1716
Condition	New
Warehouse	B

1990 Chevrolet Camaro Automatic Transmission Kickdown 8 Cyl 5.7L Lokar

U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
Hi-Tech Kickdown Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Trans Model: Gm- Th700 R4 (auto) 4 Speed
Features:
- U-Cut-To-Fit Design Works In Any Application
- Specially Extruded Liner For Extended Cable Life
- Aluminum Ferrule To Eliminate Fraying
- Made In The U.S.A.
- Lifetime Warranty
Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Transmission Manuf. Code	CID
1990 - Chevrolet Camaro	V	-	8 Cyl 5.7L	THM700-R4/4L60/MD8	350

5 In Stock

$177.58 CAD

$213.10 CAD

Brand	Lokar
Part #	L30KD-2700HT
Condition	New
Warehouse	B

1990 Chevrolet Camaro Clutch Pilot Bearing 8 Cyl 5.7L Mcleod

Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
Product Attributes:
- NOTE: This Pilot Bushing Fits In The Outer Recess Of The Crank.
- ID (in): .590in.
- Secondary Step OD (in): 1.00in.
- OD (in): 1.709in.
- Thickness: .645in.
Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Region	Engine	Sub Model	CID
1990 - Chevrolet Camaro	V	-	Manual	United States	8 Cyl 5.7L	Iroc-Z	350

2 In Stock

$50.03 CAD

$60.04 CAD

Brand	Mcleod
Part #	M988617
Condition	New
Warehouse	B

1990 Chevrolet Camaro Clutch Flywheel Counterweight 8 Cyl 5.7L Mcleod

Counterweight Kit:Chevrolet
Counterweight Kit:Chevrolet
Features:
- McLeod Racing Billet Aluminum flywheels is the best choice for customers that want a dependable good quality Aluminum flywheel. Made from Billet Aluminum 6060-T6 the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
Got a neutral balanced flywheel and externally balanced engine? McLeod flywheel counter balance weight kits are your solution. Their weights when bolted to "0" or neutral balanced McLeod flywheels turn them into a externally balanced application. They offer various bolt-on style counter weights for Chevy, Chrysler, and Ford engine applications. Solve your weight problem with McLeod flywheel counter balance weight kits. These weight kits are made to be used in conjunction with McLeod Racing Flywheels Only!

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Engine	Sub Model	CID
1990 - Chevrolet Camaro	V	-	Manual	8 Cyl 5.7L	Iroc-Z	350

3 In Stock

$60.97 CAD

$73.16 CAD

Brand	Mcleod
Part #	M98560222
Condition	New
Warehouse	B

1990 Chevrolet Camaro Transmission Clutch Kit 8 Cyl 5.7L Mcleod

Super Street Pro:Kit:1971-92 GM 10.5" x 1-1/8x26
Super Street Pro:Kit:1971-92 GM 10.5" x 1-1/8x26
Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1971-92 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic/ceramic
- Pilot Bushing Included: Yes
- Horsepower Rating: 500
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 10.5in.
- Spline: 1-1/8 X 26
- Throwout Bearing Included: Yes
- Flywheel Included: No
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
The Super Street Pro clutch kit is ideal for both the street and the track. We recommend it for cars up to 550 Hp (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual faced organic and metallic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a street friendly yet track proven clutch, the McLeod Super Street Pro is your best choice.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Region	Engine	Sub Model	CID
1990 - Chevrolet Camaro	V	-	Manual	United States	8 Cyl 5.7L	Iroc-Z	350

1 In Stock

$508.11 CAD

$609.73 CAD

Brand	Mcleod
Part #	M9875225
Condition	New
Warehouse	B

1990 Chevrolet Camaro Clutch Pilot Bearing 8 Cyl 5.7L Mcleod

Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
Product Attributes:
- Height (in):: .740in.
- Inside Diameter (in):: .590in.
- Pilot Bushing Type:: Roller
- Quantity:: Sold Individually
- Outer Diameter (in):: 1.094in.
Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Region	Engine	Sub Model	CID
1990 - Chevrolet Camaro	V	-	Manual	United States	8 Cyl 5.7L	Iroc-Z	350

3 In Stock

$22.82 CAD

$27.38 CAD

Brand	Mcleod
Part #	M988605
Condition	New
Warehouse	B

1990 Chevrolet Camaro Automatic Transmission Shift Lever Kit - Floor B&M

Ratchet 4-Speed; Floor
Console MegaShifter Automatic Shifter; Ratchet 4-Speed; Floor;
Console MegaShifter Automatic Shifter
Product Attributes:
- California Proposition 65 Chemical Name 5: Altretamine
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acifluorfen Sodium
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.810 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- Package Contents: Shifter Assembly And Installation Hardware
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: Yes
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
  - Gm- Th200 (auto) 3 Speed
  - Gm- Th350 (auto) 3 Speed
  - Gm- Th400 (auto) 3 Speed
  - Gm- Th700 R4 (auto) 4 Speed
Features:
- Fits Factory Console Applications
- Full Ratchet Action Performance
- Lighted Gear Position Indicator
- Chrome Stick/Trigger Assembly
- Chromed/Polished T-Handle
- Comfortable and Quick Shifter
- Will Not Allow Overshifting
- Will Not Allow Accidental Reverse
The MegSshifter has it all, form, function and classic style. This all adds up to bring you a quality shifter thats been one of the most popular automatic shifters of all time. This console version fits 1982-1992 Camaro and Firebirds (does not fit 1988-1992 Formula Firebird consoles.) The positive ratcheting function wont allow you to over shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track. The look and feel of the T-handle and accordion style shift boot really shows off the racing heritage of the MegaShifter. Other features include 5-foot shifter cable, cable brackets, transmission shift levers, black top console plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular GM 3 and 4-speed automatic transmissions. Note: GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499.

Additional Fitment Information:

Vehicle	Position	Transmission Manuf. Code
1990 - Chevrolet Camaro	Floor	THM700-R4/4L60/MD8

3 In Stock

$752.04 CAD

$902.45 CAD

Brand	B&M
Part #	B3280692
Condition	New
Warehouse	B

1990 Chevrolet Camaro Automatic Transmission Shift Lever Kit B&M

Stealth Pro Ratchet Automatic Shifter
Stealth Pro Ratchet Automatic Shifter; 3/4 Speed; Floor; w/Cover; Includes Shifter Assembly/5 ft. Super Duty Race Cable/Brackets; Black Anodized;
Product Attributes:
- California Proposition 65 Chemical Name 5: Altretamine
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acifluorfen Sodium
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.040 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- Package Contents: Shifter Assembly, Cover, Neutral Safety Switch, Back Up Light Switch, Gear Position Indicator, Cable, Brackets, Levers And Forward And Reverse Pattern Decals
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: No
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
  - Chrysler- Torqueflite A727 (auto) 3 Speed
  - Chrysler- Torqueflite A904 (auto) 3 Speed
  - Ford- Aod (auto) 4 Speed
  - Ford- C- 4 (auto) 3 Speed
  - Ford- C- 6 (auto) 3 Speed
  - Gm- Th200 (auto) 3 Speed
  - Gm- Th250 (auto) 3 Speed
  - Gm- Th350 (auto) 3 Speed
  - Gm- Th400 (auto) 3 Speed
  - Gm- Th700 R4 (auto) 4 Speed
Features:
- Reverse Lockout Meets NHRA And IHRA Requirements
- Carbon Fiber Look Without The Cost
- Reliable And Race Proven Shifter Design
The Magnum Grip Stealth Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter and will not allow you to miss a shift by over-shifting a gear. The reverse lockout feature only requires one-hand to operate and meets both NHRA and IHRA safety regulations for racing. Other features include a neutral safety switch, backup light switch, along with a simulated carbon fiber wrapped aluminum cover. The cover is treated to a high quality hydro-dip process and material to add a high-tech and realistic carbon look to your vehicles interior, but at a substantial cost savings versus carbon fiber. This shifter includes our Magnum Grip shift handle with replaceable side grip plates, tough black anodized finish, 5-foot long Super-duty shift cable, gear indicator, cable brackets and transmission levers for use with most popular 3-speed transmissions. Comes with all necessary hardware and detailed instructions for an easy at home installation. Be sure to check out all the optional side grip Comes with all necessary parts for use with three and four-speed automatic transmissions such as 1966 and later Chrysler Torqueflite A727, A904, A500, A518, Ford C4, C5, C6, GM TH200, TH250, TH350, TH400, 2004R, 700R4, 4L60, 4L60E - 4L85E without PRNDL switch. Notes: Ford AOD transmissions require installation kit #40496, AODE and 4R70W require installation kit #40504, E40D and 4R100 require installation kit #40505 and GM 4L60E - 4L85E transmissions with PRNDL switch require cable bracket #70499. Overall dimensions - 10.75L x 2.9W x 12H