1977 Electric Fuel Pump Parts


Showing 1 - 10 of 50 products
Image
SKU
Product
Rating
Price

Carter
  • Fuel Pump - Electric In Line
  • Universal Electric Pump Replaces Mechanical Pump; For safety reasons, it is recommended that an A68301 Safety Switch be installed with this replacement pump. This will prevent engine damage, and reduce the chance of fire should the engine stops running without the ignition switch being in the off position.
  • Product Attributes:
    • Voltage: 12v
    • Minimum Flow Rating: 26.4
    • Negative Ground: Yes
    • Mounting Hardware Included: Yes
    • Fuel Type:
      • Diesel
      • Gas
    • Pump Type: Electric
    • Fuel Sending Unit Included: No
    • Length: 112
    • Pump Design: Gerotor
    • Outlet Outside Diameter: 3/8
    • Inlet Fitting Thread Size: 1/8-27 Npt
    • Mounting Bracket Included: Yes
    • Minimum Pressure: 2.3
    • Seal And Lock Ring Included: No
    • Wiring Harness Included: No
    • Terminal Type: Lead Wire
    • Inlet Outside Diameter: 3/8
    • Regulator Included: No
    • Strainer Included: No
    • Wire Quantity: 2
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

This Part Fits the Following OEM/Substitute Numbers:
1234666, 151-1090, 151-1091, 16700-634-005, 16700-634-015, 16700-634-315, 16700-634-672, 16700-634-673, 19162977, 2126 087, 2421 110, 3621 674, 3700900, 3700901, 599-1011, 602-1249, 6472381, 69404...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1977 - Mercury Capri V - In-Line 6 Cyl 2.8L 171

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1977 - Chevrolet Corvette

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1977 - Dodge D150

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1977 - Jaguar XJ6

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1977 - Mazda Mizer

Bosch
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Electric
  • New

Additional Fitment Information:
Vehicle
1977 - Jaguar XJ12

Professional Parts Sweden
Additional Fitment Information:
Vehicle Position
1977 - Volvo 265 In-Tank

Professional Parts Sweden
  • The fuel pump originally designed for this application is no longer manufactured. In its place, we are now offering a later design pump that also includes a conversion kit (bracket, fuel line adapter, and misc. hardware) to allow its use on this application. Additional modification may be required for installation of this fuel pump on some vehicles.

Additional Fitment Information:
Vehicle Position
1977 - Volvo 265 In-Line

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: -07/1977
  • In tank

Additional Fitment Information:
Vehicle Prod. Date Range
1977 - Toyota Celica To:07-00-77

Genuine
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Production: 03/1976-08/1976, California
  • In tank

Additional Fitment Information:
Vehicle Body Prod. Date Range
1977 - Toyota Corolla Coupe Fr:03-00-76 To:08-00-76
Showing 1 - 10 of 50 products

Loading...