Shop By Product Matching "Mr Gasket 85b"


Showing 1 - 10 of 15 products
Image
SKU
Product
Rating
Price

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1971 - Oldsmobile F85

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1969 - Oldsmobile F85

Mr Gasket
  • Includes 0/2/4/6/8 deg. Bushings; Race Only
  • Advance And Retard Cam Bushings; Includes 0/2/4/6/8 deg. Bushings; Race Only;
  • Advance And Retard Cam Bushings
  • Product Attributes:
    • WARNING CA Proposition 65:
      • No
      • Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Advance Or Retard Cam
    • Increase Low-End Torque
    • Mid-Range Horsepower
    • Reduce Extra Low-End Torque
    • Increase Top-End Horsepower
  • With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways cant give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Additional Fitment Information:
Vehicle
1969 - Chrysler 300

Mr Gasket
  • Includes 0/2/4/6/8 deg. Bushings; Race Only
  • Advance And Retard Cam Bushings; Includes 0/2/4/6/8 deg. Bushings; Race Only;
  • Advance And Retard Cam Bushings
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Advance Or Retard Cam
    • Increase Low-End Torque
    • Mid-Range Horsepower
    • Reduce Extra Low-End Torque
    • Increase Top-End Horsepower
  • With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways cant give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Additional Fitment Information:
Vehicle
1977 - Chevrolet Corvette

Mr Gasket
  • 3/16 in. Thick; w/Locating Tabs; Cork Rubber
  • Ultra Seal Valve Cover Gasket Set; 3/16 in. Thick; w/Locating Tabs; Cork Rubber;
  • Ultra Seal Valve Cover Gasket Set
  • Product Attributes:
    • Valve Cover Gasket Material: Ultra Seal
    • WARNING CA Proposition 65: No
    • Valve Cover Gasket Thickness: 0.187 In.
    • Engine Make/Size: Chevrolet Small Block Gen I
    • Package Type: Retail - Skin Pack
  • Features:
    • Creates A Positive Seal By Controlling Swelling
    • Available In Extra Thick For Rocker Arm Clearance
  • Ultra-Seal is Mr. Gasket premium valve cover gasket material. Its manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularities and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

Additional Fitment Information:
Vehicle
1985 - Chevrolet Corvette

Mr Gasket
  • 3/16 in. Thick; w/Locating Tabs; Cork Rubber
  • Ultra Seal Valve Cover Gasket Set; 3/16 in. Thick; w/Locating Tabs; Cork Rubber;
  • Ultra Seal Valve Cover Gasket Set
  • Product Attributes:
    • Valve Cover Gasket Material: Ultra Seal
    • WARNING CA Proposition 65: No
    • Valve Cover Gasket Thickness: 0.187 In.
    • Engine Make/Size: Chevrolet Small Block Gen I
    • Package Type: Retail - Skin Pack
  • Features:
    • Creates A Positive Seal By Controlling Swelling
    • Available In Extra Thick For Rocker Arm Clearance
  • Ultra-Seal is Mr. Gasket premium valve cover gasket material. Its manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularities and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

This Part Fits the Following OEM/Substitute Numbers:
1603

Additional Fitment Information:
Vehicle
1980 - Chevrolet Corvette

Mr Gasket
  • Magnetic
  • Oil Pan Drain Plug; Magnetic;
  • Oil Pan Drain Plug
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Overall Length: 1.500 In.
  • Features:
    • Accumulates Metal Particles
    • Prevents Possible Damage
  • Rare Earth Magnetic drain plug accumulates metal particles, preventing possible engine damage. Includes rubber seal washer. 1/2-20 thread.

Additional Fitment Information:
Vehicle Block CC Engine CID
1966 - Oldsmobile F85 V 5409 8 Cyl 5.4L 330

Mr Gasket
  • Magnetic
  • Oil Pan Drain Plug; Magnetic;
  • Oil Pan Drain Plug
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Overall Length: 1.500 In.
  • Features:
    • Accumulates Metal Particles
    • Prevents Possible Damage
  • Rare Earth Magnetic drain plug accumulates metal particles, preventing possible engine damage. Includes rubber seal washer. 1/2-20 thread.

Additional Fitment Information:
Vehicle Block CC Engine CID
1969 - Oldsmobile F85 V 5733 8 Cyl 5.7L 350

Mr Gasket
  • 8.875 in.; 12 Bolt
  • Differential Cover Gasket; Rear; 8.875 in.; 12 Bolt;
  • Differential Cover Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Thickness: 0.047 In.
  • Features:
    • Precision Cut
    • High-Quality Materials
    • Reusable
  • Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1972 Chevrolet/GM passenger car 12 bolt 8.875 inch ring gear 1965-72 Passenger Car.

Additional Fitment Information:
Vehicle Position
1969 - Oldsmobile F85 Rear

Mr Gasket
  • 8.875 in.; 12 Bolt
  • Differential Cover Gasket; Rear; 8.875 in.; 12 Bolt;
  • Differential Cover Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Thickness: 0.047 In.
  • Features:
    • Precision Cut
    • High-Quality Materials
    • Reusable
  • Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1972 Chevrolet/GM passenger car 12 bolt 8.875 inch ring gear 1965-72 Passenger Car.

Additional Fitment Information:
Vehicle Position
1972 - Oldsmobile F85 Rear
Showing 1 - 10 of 15 products

Loading...