1969 Ford GT40 Distributor Parts

Choose your Engine for your 1969 Ford GT40

8 Cyl 4.7L 8 Cyl 7.0L

Showing 1 - 4 of 4 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1969 Ford GT40 Distributor 8 Cyl 4.7L Proform

HEI Distributor; Street/Strip; Built-In Coil; Blue Cap; Fits Ford 289-302 Engine
HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
HEI Distributor; Street/Strip Version; Built-In Coil With Magnetic Trigger; Features Blue Cap; Fits Ford 289-302 5.0 Engines; Comes With An Iron Gear and With Not Work With Factory Roller Cams; Made From Billet Aluminum With Natural Finish
Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Make: Ford
- Cap Color: Blue
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Distributors
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1969 - Ford GT40	V	4727	8 Cyl 4.7L	289

5 In Stock

$221.70 CAD

$266.04 CAD

Brand	Proform
Part #	P7566969B
Condition	New
Warehouse	B

1969 Ford GT40 Distributor 8 Cyl 4.7L Proform

HEI Distributor; Street/Strip; Built-In Coil; Black Cap; For Ford 289-302 Engine
HEI Distributor; Street/Strip; Built-In Coil; Black Cap; Housing Finish:Natural
HEI Distributor; Street/Strip Version; Built-In Coil With Magnetic Trigger; Features Black Cap; Fits Ford 289-302 5.0 Engines; Comes With An Iron Gear and With Not Work With Factory Roller Cams; Made From Billet Aluminum With Natural Finish
Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Make: Ford
- Cap Color: Black
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Ford Hei Distributor
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1969 - Ford GT40	V	4727	8 Cyl 4.7L	289

6 In Stock

$222.64 CAD

$267.17 CAD

Brand	Proform
Part #	P7566969BK
Condition	New
Warehouse	B

1969 Ford GT40 Distributor 8 Cyl 7.0L MSD

Must Be Used w/MSD 6/7/8 Series Ignition; Includes Cap; Steel Gear;Legal On Non-Emissions Controlled Vehicles Or For Race Use
Pro-Billet Distributor; Must Be Used w/MSD 6/7/8 Series Ignition; Includes Cap; Steel Gear;
Pro-Billet Distributor
Product Attributes:
- Distributor Type: Magnetic Pickup
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Ford Fe
Features:
- CNC machined billet aluminum housing and billet aluminum base
- Steel Gear Installed
- Shaft Is QPQ Coated And Guided By A Sealed Ball Bearing
- Advance plate and weights are fine blanked from chrome moly steel
- Advance weight pins are staked and tig welded to the plate
- Easy-To-Adjust With Supplied Springs And Stop Bushings
- Nylon pads ensure smooth operation of the advance weights
- Assembly Can Be Locked Out For Crank Trigger Systems
- Create Stable Trigger Signals Throughout The RPM Range
MSD now offers Ford distributors with steel gears for use with hydraulic roller cams. In the world of modern engine design, its hard to beat a hydraulic roller camshaft for all-around performance. Its crucial to match the distributor gear with the cam material to prevent premature failure of the cam or distributor gear which can lead to engine damage. Ford distributors present a challenge when changing the distributor gear due to their pressed fit, the need to cross drill the distributor shaft and set the gear to a specific height. Weve taken the trouble out of the mix with our line of popular Ford distributor applications that come with a steel gear installed ready for hydraulic roller cams. Whether youre working with a crate engine or building your own combination, MSD has the performance distributor ready.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1969 - Ford GT40	V	6997	8 Cyl 7.0L	427

1 In Stock

$685.64 CAD

$822.77 CAD

Brand	MSD
Part #	M4685941
Condition	New
Warehouse	B

1969 Ford GT40 Distributor 8 Cyl 7.0L MSD

Must Be Used w/MSD 6/7/8 Series Ignition; Includes Cap; Steel Gear;Legal On Non-Emissions Controlled Vehicles Or For Race Use
Pro-Billet Distributor; Must Be Used w/MSD 6/7/8 Series Ignition; Includes Cap; Steel Gear;
Pro-Billet Distributor
Product Attributes:
- Distributor Type: Magnetic Pickup
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Ford Fe
Features:
- CNC machined billet aluminum housing and billet aluminum base
- Steel Gear Installed
- Shaft Is QPQ Coated And Guided By A Sealed Ball Bearing
- Advance plate and weights are fine blanked from chrome moly steel
- Advance weight pins are staked and tig welded to the plate
- Easy-To-Adjust With Supplied Springs And Stop Bushings
- Nylon pads ensure smooth operation of the advance weights
- Assembly Can Be Locked Out For Crank Trigger Systems
- Create Stable Trigger Signals Throughout The RPM Range
MSD now offers Ford distributors with steel gears for use with hydraulic roller cams. In the world of modern engine design, its hard to beat a hydraulic roller camshaft for all-around performance. Its crucial to match the distributor gear with the cam material to prevent premature failure of the cam or distributor gear which can lead to engine damage. Ford distributors present a challenge when changing the distributor gear due to their pressed fit, the need to cross drill the distributor shaft and set the gear to a specific height. Weve taken the trouble out of the mix with our line of popular Ford distributor applications that come with a steel gear installed ready for hydraulic roller cams. Whether youre working with a crate engine or building your own combination, MSD has the performance distributor ready.