Vehicle
Vehicle
The Largest Auto Parts Store in Canada
About us
Feedback
Retrieve Quote
usa ca
Menu
Feedback Retrieve Quote
Account 0 Cart Garage
CA
Select a vehicle to find exact fit parts
Back to vehicles list
Hello, Log In My Account
0 Shopping Cart $0.00

2006 GMC Yukon XL 1500 Exhaust Header Hedman

4 on 33 ratings
  • Features:
    • Handcrafted, Mild Steel Construction.
    • The Short Tube Header Design Provides Good Low-End Power, and Provides Excellent Ground Clearance And Component Compatibility.
    • Stock-Style Header Collector Bolts Up To The Factory Exhaust Without Modification.
    • Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
    • Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
    • Proud To Say, Made In The USA, Since 1954!

  • Hedman Hedders has been manufacturing quality headers in the USA since 1954, and they've been manufacturing long and MID-LENGTH tube headers for Chevy trucks for nearly as long. Each set uses mild steel, smooth flowing, CNC mandrel bent tubes, that are hand-welded to ensure each pair is identical to the next. The stock-design collector of these headers allows them to bolt directly to your Chevy LS's exhaust system to bolt up, and they have provisions for EGR and NON-EGR engines. This model was tested, then issued an E.O. (Executive Order) Number by the California Air Resources Board (C.A.R.B.), making them 50 state legal for use on the vehicles listed on E.O.#D167-31.

    These uncoated, EO Replacement headers are Hedman's best selling late model Chevy truck headers. They fit a wide range of early to 1999-2006 2WD and 4WD Chevy/GMC Trucks and SUVs, powered by a 4.8L, 5.3L or 6.0L Chevy LS engine. Included in this header's long list of applications is 1999-2006 Chevy/GMC 1/2 to 1 Ton 2WD and 4WD Silverado, Sierra, Yukon, Tahoe, Escalade, Suburban and Hummer H2 (check the application listings for exact fitment). The smooth 1-5/8 in. tubular design provides ample exhaust flow to let your truck's LS motor breathe easy, and produce significatnly more horsepower and torque, while maintaining street legal status.

    These headers are uncoated, and ship from the factory with a temporary black paint that will burn off when submitted to normal operating temperatures. For protection against the element and lower underhood temperatures, these headers are also available with a silver or black ceramic-metallic finish.

    ach set includes a pair of header gaskets, collector gaskets, header flange bolts and collector bolts.

    Hedman Hedders is so confident in the quality of its headers that these headers are factory backed by a Limited Lifetime Warranty.


Additional Fitment Information:
Vehicle Region Drive Type
2006 GMC Yukon XL 1500 United States RWD
Brand Hedman
Part # H5669690
Condition New
Warehouse B
Hedman

Yukon XL 1500 Hedman Exhaust Header 69690 2006 GMC
  • 99-06 GM Truck Headers; 4.8-6.0L; 1-5/8 in. Tubes; FLAT/FLAT Coll.-Uncoated
  • Air Conditioning: Yes Power Steering: Yes Auto Transmission - Column: Yes Auto Transmission - Floor: Yes Manual Transmission - Column: No Manual Transmission - Floor: Yes Footnotes: (WWE) With or Without E.G.R. E.O. Number: D167-31 Emissions Notes: 50 State Street Legal headers for vehicles listed on C.A.R.B. E.O D-167-31 Y-Pipe Included:No with EGR:No with A.I.R. System:No Package Contents:Set of Headers, mounting hardware and gaskets Installation Hardware Included:Yes Replacement Gasket:27470 Cylinder Head:Stock Profile Heads Quantity:Sold as a pair. Motor Mounts Included:No Crossover Pipe Included:No Catalytic Converter(s) Included:No Catalog Code:HED Weld-Up:No Tuned:No Primary Tube Gauge:14g Primary Tube Diameter (in):1.625 in. Mounting Hardware Included:Yes Header Material:Mild Steel Header Finish:Uncoated Cylinder Head Port Shape:Round Variations:69696 Tube Style:Shorty Tube Size:1-5/8 in. Tube Material Thickness:14g Tube Length:Short Tubes Tube Diameter:1-5/8 in. Tube Design:SHORT TUBES Power Steering:Yes Port Shape:Round Material:Mild Steel Manual Transmission - Floor:Yes Manual Transmission - Column:No Key Feature:Optional EGR incl. IMPORTANT!:Models without E.G.R. must use block-off plate. Header Port Shape:Round Replacement Head Flange Gasket:27470 Flange Style:Standard Finish Type:Uncoated Mild steel Finish:Uncoated Emissions Notes:EO# D167-31 (click here for covered vehicles in document on ARB.CA.GOV website) Contents:One pair of headers, head flange gaskets, collector flange gaskets (when applicable), 3-bolt exhaust adapters (when applicable) and mounting hardware. Collector Style:There are 2 factory Collector designs. INSPECT STOCK CONNECTION BEFORE ORDERING! Collector Size:Stock Automatic Transmission - Floor:Yes Automatic Transmission - Column:Yes Air Conditioning:Yes Reducers Included:No Header Style:Short Tube Gasket Or Seal Included:Yes Collector Attachment:Stock Flange Thickness:0.375 in. Bolts/Studs Included:Yes Header Construction:Standard-Duty E.O. #:Yes California Proposition 65:WARNING: Cancer. For more info visit www.P65Warnings.ca.gov Title:HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-5/8 IN. TUBE DIA.; STOCK COLL.; SHORTY DESIGN Reducer Outlet Size:Factory hookup Notes :99-07 GM 1/2, 3/4, 1 Ton Truck/SUV 4.8-6.0L LS Series Engine Collector Bolts Included:Yes Collector Diameter:Stock Exhaust System Dia:Factory hookup
  • Standard-Duty Headers; 1999-2006 Chevy/GMC 1/2-1 Ton Trucks/SUVs with 4.8, 5.3, 6.0L LS Engine; 1-5/8 in. Short Tubes; 50 State Legal; TWIN FLAT Collectors- Uncoated

    • General

    California Proposition 65
    Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    Header Port Shape
    Round
    Quantity
    Sold As A Pair.
    with A.I.R. System
    No
    Cylinder Head
    Stock Profile Heads
    Tuned
    No
    Cylinder Head Port Shape
    Round
    Header Style
    Short Tube
    Manual Transmission - Column
    No
    Flange Style
    Standard
    Collector Bolts Included
    Yes
    Bolts/Studs Included
    Yes
    Automatic Transmission - Floor
    Yes
    with EGR
    No
    Tube Material Thickness
    14g
    Tube Diameter
    1-5/8 In.
    Automatic Transmission - Column
    Yes
    Package Contents
    Set Of Headers, Mounting Hardware And Gaskets
    Reducer Outlet Size
    Factory Hookup
    Tube Size
    1-5/8 In.
    Port Shape
    Round
    Tube Length
    Short Tubes
    Manual Transmission - Floor
    Yes
    Collector Diameter
    Stock
    Tube Style
    Shorty
    Variations
    69696
    Collector Size
    Stock
    Header Finish
    Uncoated
    IMPORTANT!
    Models Without E.g.r. Must Use Block-off Plate.
    Mounting Hardware Included
    Yes
    Weld-Up
    No
    Collector Attachment
    Stock
    Header Fasteners Included
    Yes
    Y-Pipe Included
    No
    Contents
    Headers, Gaskets (when Applicable), Mounting Bolts
    Finish Type
    Uncoated Mild Steel
    Notes
    99-07 Gm 1/2, 3/4, 1 Ton Truck/suv 4.8-6.0l Ls Series Engine
    Motor Mounts Included
    No
    Primary Tube Diameter (in)
    1.625 In.
    Crossover Pipe Included
    No
    Header Construction
    • Mild Steel- Standard-duty
    • Standard-duty
    Replacement Head Flange Gasket
    27470
    Tube Design
    • Short Tubes
    • Standard
    Key Feature
    Optional Egr Incl.
    Power Steering
    Yes
    E.O. #
    Yes
    Exhaust System Dia
    Factory Hookup
    Flange Thickness
    0.375 In.
    Air Conditioning
    Yes
    Installation Hardware Included
    Yes
    Reducers Included
    No
    Primary Tube Gauge
    14g
    Header Material
    Mild Steel
    Title
    Hedman Hedders Standard Uncoated Headers; 1-5/8 In. Tube Dia.; Stock Coll.; Shorty Design
    Catalytic Converter(s) Included
    No
    Replacement Gasket
    27470
    Collector Style
    There Are 2 Factory Collector Designs. Inspect Stock Connection Before Ordering!
    Emissions Notes
    Eo# D167-31 (click Here For Covered Vehicles In Document On Arb.ca.gov Website)

    Packaging

    bar code
    732611696906
    package quantity
    1
    length
    22.00 in
    width
    8.00 in
    height
    13.00 in
    weight
    20.00 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Bobby G.
      27 Mar, 2015
      Very nice and good price thanks
    2. SEAN B WAGERS
      12 Jan, 2015
      Fantastic finish and workmanship. Love the silver ceramic coating.
    3. Christopher Davis
      11 Dec, 2014
      They bolted right on with no issues, a perfect match. Unfortunately with the Flowmaster muffler I already had I did not notice a difference in sound.
    4. anthony wilson
      11 Dec, 2014
      Would have been 5 stars if the instalation on the passenger side was not so tight!
    5. Rafael Marcano
      24 Nov, 2014
      excelente
    6. frederic
      05 Nov, 2014
      doesnt as well as they should...
    7. Drop shopper
      24 Oct, 2014
      great sounding headers for my impala and good exhaust flow mid range
    8. Elias S
      07 Oct, 2014
      Great headers and super fast shipping!!
    9. AutoPartsWAY Customer
      07 Oct, 2014
      Great fit. Easy to install without lifting engine. High quality finish and strong welds. Also has great ground clearance. Only drops to about even with cross-member under oil pan. My 9" sump pan now hangs about an inch lower than the headers.
    10. Tyler West "Z28west"
      02 Sep, 2014
      It is supposed to be a direct fit for my 1978 Camaro Sport Coupe LT with a 350 and a 4 speed, but to make it fit it needed modification on the drivers side motor mount and modification to the header itself to clear my temperature sensor. The passenger side went in no problem though and it clears all my spark plugs fine, but I got long spark plug boots and it looks like a couple of places I will need 90 degree boots that are shorter to make them not hit the header pipe. They look nice at least.
    11. Marci S.
      28 Aug, 2014
      The headers fit great and cleared the frame. The outlet is below the transmission crossmember, so plan on that when you look at your exhaust. The paint burns off quickly if you are going bare, but it makes A LOT of smoke. Otherwise, sand blast and coat before you install. Came with flange gaskets and reducers.
    12. Paal Selnaes
      19 Aug, 2014
      Do not start your engine in your garage after adding these!The black paint burns of and stinks like a nothing else!
    13. J. M. Carter "Jason Carter"
      12 Aug, 2014
      Great fit came on time and awesome look. I would recommend these for anyone in the market for a new set of headers.
    14. Michael
      03 Aug, 2014
      Great seller, quick shipping. The product was complete crap though. I have a set of the same brand and model from 7-8 years ago on my 72 C10 and they are still holding up great. The collectors on this set were bent and unusable and were obviously damaged before the coating was put on. I knew with the cheaper prices I would be getting a thinner flange and possibly making other sacrifices but these are inexcusable. I will look for other brands going forward, Hedman's quality control is obviously lacking.
    15. jscialabba
      16 Jul, 2014
      nice quality
    16. michael della
      12 Jul, 2014
      This are perfict for my low budget hot rod
    17. Jason Conaway "JMC"
      04 Jul, 2014
      These went on a 84 c10 305 stock. The only issue I ran across was that the header on the pass side was hitting the metal fuel lines. I called Hedman and they said they have never heard of this issue. I was able to bend the fuel lines just enough to keep them from touching the header. Then I wrapped the fuel lines with heat reflective tape. No problem after about a month of driving. If you have the money get the ones already coated. I had these sand blasted and painted them with VHT Fireproof black, using their Fireproof primer also. I baked the paint on the headers using the mounted on vehicle method as recommended by Hedman, So far so good as far as the paint staying on. Just a pain to paint. Truck sounds awesome with true duals 2 1/2" pipe with 40 series Flowmasters. No cats. No H pipe or X pipe. Off road vehicle only.
    18. Murch
      30 Apr, 2014
      Quick delivery, perfect fit not one issue would definitely recommend, Not a huge performance gain but that wasn't expected, very neat and tidy.
    19. Dave C
      20 Apr, 2014
      Delivery was good. Box intact and sealed. One of the down pipes had a dent the size of a silver dollar 1/2" deep. Quality???I will have to live with it.
    20. Russ
      10 Jan, 2014
      item came as described but had a heck of a time installing them in my 70 nova sb with a/c. Had to cutevaporator box at bottom to clear headers. The collectors were new for me but seem to seal quite well.Next time will try hooker comps
    21. eagle275
      31 Dec, 2013
      I just ordered the wrong ones. I know several people who use these, get them powdered coated first or spray a very high temp coating/paint. Preparation is key to coating.
    22. larry french
      15 Oct, 2013
      I chose these partially due to pricing, but also the name. They look good, though I haven't completed the car as of yet to evaluate the overall performance factors.
    23. Ashley Ruiz
      09 Oct, 2013
      came quicker than i thought good quality even better that it came with the gaskets. love this product. i really recomend this product if you need good cheap headers
    24. varmintslayer
      11 Sep, 2013
      Good sound quality. Simple install. Rusted out within 2 years so make sure to coat them with a high heat rust inhibitor
    25. juan a carreon
      18 Mar, 2013
      They look and sound perfect. Fit was perfect. I recommend them to anyone who is looking for great American products!!! Fast shipment too!!!
    26. Clout408
      07 Feb, 2013
      I snagged up these shorty headers after finding out that long tubes aren't CA legal. What an improvement in quality over the notoriously bad stock headers on my 2000's Mustang. No more exhaust leak whoo hoo!
    27. matt kaarlela
      03 Jan, 2013
      I'm happy with these overall. I did have some fitment issues so have to take off one star for that but with some coaxing, I finally got them all bolted up. I was happy I was able to buy american made product that didn't cost a fortune. Wish all my hotrod replacement parts were US made.
    28. JIM
      12 Dec, 2012
      Awesome!
    29. Richard K Braun
      11 Nov, 2012
      Very well constructed product. Will fit the AMC 304 currently in my CJ-7 as well as the AMC 401 that I am building to replace the 304 when it tires out. I like the under carriage exit leaving the vehicle to appear more stock. The the stubs that bolt to the lower plates of the manifolds are included in the set and will allow the manufacture and attachment of a custom exhaust system. These manifolds are sold as " uncoated " however, they are painted with a standard quality paint to prevent rust during shipping and storage. High temp would burn this coating off rapidly, so requires stripping prior to recoating with high temp paint or coating. The price is unbeatable, particularly when Free Shipping is taken into consideration....
    30. MCB
      06 May, 2012
      These are a great value, mine have lasted over 20 years and never had any failed welds or any problems. Gas mileage improved about 10 percent and torque is noticeably greater. Never any issues with rust or corrosion and they sound great.Despite what the ad (and some rooky southern California smog techs) say, these hedders are legal in California on 6200 gvwr and higher pickups manufactuered before 1979, which are all classified as federal heavy duty emmisions vehicles and came stock without cat, egr, evap etc etc.
    31. Adventure Junkie
      08 Apr, 2012
      CA SMOG LEGAL!!! nice product. Install is a PITA on both sides. The oil dipstick and tube will need to be removed and then modified to fit. or you can buy a flexable LOKAR setup. On the PASS side, be ready to ley over the engine and shoehorn these babies in. Getting them bolted to the mid pipe is a PITA also but overall a great product. It seals up well with the gasket provided. Just use a little high temp gasket maker on both sides to ensure a complete seal. The bolts go in easy and dont strip out like others. take your time and go easy, it will fit. They increase the sound and add som HP to the V6. Great when pair up with the DYNOMAX exhaust kit.
    32. Damon
      21 Jan, 2012
      The headers are not the chromed out version you see on the photo, but rather are the "Chikara" standards. However, they are good quality and you receive all the necessary equipment, bolts, O2 sensor rewire kit, individually packaged header gasket, collector gasket, and decals. If you have never done headers before than it comes with an instructional how to flyer and the steps one should take before and after attaching your equipment. Some of the black coat is coming off from being banged together during shipping, but overall I am extremely satisfied. My Talon now has better breathing and it really shows with this simple bolt on from Hedman!!
    33. J. Ellis "~Kitsune~"
      28 Oct, 2011
      Exactly what we were looking for, fixed the car right up and a few more days should be driving it! Thanks!

    Loading...