2001 Toyota Bilstein Parts

Choose a Model for your 2001 Toyota


Showing 1 - 10 of 47 products
Image
SKU
Product
Rating
Price

Bilstein
  • B8 6112 - Suspension Kit
  • Front Lift Height: 0-2.4"
  • Front Suspension Kit
  • B8 6112
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Reservoir: No
    • Body Design: Snap Ring Grooved Body (coilover)
    • Body Diameter (ID): 60mm
    • Spring Seat Included: Yes
  • Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

This Part Fits the Following OEM/Substitute Numbers:
47-267558

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Body Drive Type CID
2001 - Toyota Tacoma V 3378 Front 6 Cyl 3.4L Base Extended Cab Pickup 4WD -

Bilstein
  • B8 6112 - Suspension Kit
  • Front Lift Height: 0-1.8"
  • Front Suspension Kit
  • B8 6112
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Reservoir: No
    • Body Design: Snap Ring Grooved Body (coilover)
    • Body Diameter (ID): 60mm
    • Spring Seat Included: Yes
  • Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Additional Fitment Information:
Vehicle Position Sub Model Body
2001 - Toyota Tacoma Front Pre Runner Extended Cab Pickup

Bilstein
  • B8 6112 - Suspension Kit
  • Front Lift Height: 0.8-3.1"
  • Front Suspension Kit
  • B8 6112
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Reservoir: No
    • Body Design: Snap Ring Grooved Body (coilover)
    • Body Diameter (ID): 60mm
    • Spring Seat Included: Yes
  • Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Additional Fitment Information:
Vehicle Position Sub Model Body
2001 - Toyota Tacoma Front Pre Runner Crew Cab Pickup

Bilstein
  • B8 6112 - Suspension Kit
  • Front Lift Height: 0-1.9"
  • Front Suspension Kit
  • B8 6112
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Included: No
    • Internal Design: Monotube
    • Reservoir: No
    • Body Design: Snap Ring Grooved Body (coilover)
    • Body Diameter (ID): 60mm
    • Spring Seat Included: Yes
  • Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Body Drive Type CID
2001 - Toyota Tacoma L 2694 Front 4 Cyl 2.7L Base Standard Cab Pickup 4WD -

Bilstein
  • B1 (Components)-Shock Absorber Reservoir Mount
  • Optional Billet Reservoir Clamp Mount for 5160-series shocks only
  • Reservoir Bracket Assembly
  • B1 (Components)
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Work Flawlessly w/Bilstein 5160/5165 Series Shocks
    • Billet Aluminum
    • Clamps Secure Reservoir To Shock Body
    • Stays Positioned Exactly Where You Choose Even Off-Road
    • Divides Into Two Separate Pieces
    • Installs Extremely Easily
    • Connected By Two Heavy Duty Stainless Bolts.
  • Bilstein B1 (Components) Shock Absorber Reservoir Mounts are engineered to work in conjunction with Bilstein B8 5160 and B8 5165 shock absorbers. These billet aluminum mounts secure the reservoir to the shock absorber body ensuring it stays positioned perfectly, even during off-road use. The clamp divides into two separate pieces to make installation extremely easy, and is connected by two heavy duty stainless steel bolts. Finished in black anodized coating to protect against harsh off-road elements, these reservoir mounts will provide safety and convenience in an attractive package.

This Part Fits the Following OEM/Substitute Numbers:
11176015, A00-H601, F4-A00-H601-H0

Additional Fitment Information:
Vehicle Sub Model Drive Type
2001 - Toyota Tundra Limited 4WD

Bilstein
  • B6 4600-Shock Absorber
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Eye 19mm
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: Blue Straight
    • Lower Mount Type: Eye 19mm
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

This Part Fits the Following OEM/Substitute Numbers:
088569, 24184977, 320506, 48531-09100, 48531-80695, 48531-80696, 48531-A9020, 48531-A9040, 920506, 980-24-672, B46-2286, F4-B46-2286-H0, MX6131, RS5180, RS999180

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Drive Type CID
2001 - Toyota Tacoma V 3378 Rear Right 6 Cyl 3.4L Base 4WD -

Bilstein
  • B8 5100-Shock Absorber
  • For Rear Lifted Height: 1-1.5" A minimum 1" lift block is required for this application
  • 46mm Monotube Shock Absorber
  • B8 5100
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 13.620 In.
      • 346mm
    • Upper Mount Type: Eye 19mm
    • Extended Length (MM): 540.0
    • Reservoir: No
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Smooth Body (non-coilover)
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 346.0
    • Boot Included: Black Bellows
    • Lower Mount Type: Eye 19mm
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 21.260 In.
      • 540mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein 5100 Series
    • Monotube Gas Pressure Construction
    • Designed For Consistent Fade-Free Performance
    • Self-Adjusting Deflective Disc Valving
    • High-Flow Piston Reduces Harshness
    • Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
    • Zinc Coating For Resistance To Off-Road Elements
    • Custom Valving Available
    • Factory Rebuildable
    • Made In The USA
  • Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

This Part Fits the Following OEM/Substitute Numbers:
33-249933

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Drive Type CID
2001 - Toyota Tacoma L 2694 Rear Left 4 Cyl 2.7L Base 4WD -

Bilstein
  • B8 5100 (Ride Height Adjustable)-Shock Absorber
  • Front Lift Height: 0-2"
  • 46mm Monotube Shock Absorber
  • B8 5100 (Ride Height Adjustable)
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 13.860 In.
      • 352mm
    • Upper Mount Type: Stem
    • Extended Length (MM): 474.0
    • Reservoir: No
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Snap Ring Grooved Body (coilover)
    • Spring Seat Included: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 352.0
    • Boot Included: Black Straight
    • Lower Mount Type: Eye 14.2mm
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 18.660 In.
      • 474mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein 5100 Series
    • Monotube Gas Pressure Construction
    • Designed For Consistent Fade-Free Performance
    • Self-Adjusting Deflective Disc Valving
    • High-Flow Piston Reduces Harshness
    • Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
    • Zinc Coating For Resistance To Off-Road Elements
    • Custom Valving Available
    • Factory Rebuildable
    • Made In The USA
  • Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Drive Type CID
2001 - Toyota Tacoma L 2694 Front 4 Cyl 2.7L Base 4WD -

Bilstein
  • B8 5100 (Ride Height Adjustable)-Shock Absorber
  • Front Lift Height: 0-2.8" Without Electronic or Self-Leveling Suspension
  • 46mm Monotube Shock Absorber
  • B8 5100 (Ride Height Adjustable)
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Collapsed Length:
      • 13.230 In.
      • 336mm
    • Upper Mount Type: Stem
    • Extended Length (MM): 466.0
    • Reservoir: No
    • Body Inside Diameter: 46mm
    • WARNING CA Proposition 65: Yes
    • Body Design: Snap Ring Grooved Body (coilover)
    • Spring Seat Included: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Collapsed Length (MM): 336.0
    • Boot Included: Black Bellows
    • Lower Mount Type: Eye 14.4mm
    • Adjustable Damping: Non-adjustable
    • Extended Length:
      • 18.350 In.
      • 466mm
    • Body Diameter (ID): 46mm
  • Features:
    • Bilstein B8 5100 Shock Absorbers
    • Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Durability And Performance
    • Vehicle Specific Ride Tuning
  • Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
24-188265

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2001 - Toyota Sequoia Front Limited 4WD

Bilstein
  • B6 4600-Shock Absorber
  • 46mm Monotube Shock Absorber
  • B6 4600
  • Product Attributes:
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Internal Design: Monotube
    • Upper Mount Type: Eye 19mm
    • Reservoir: No
    • WARNING CA Proposition 65: Yes
    • Spring Seat Included: No
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Reservoir Included: No
    • Boot Included: Blue Straight
    • Lower Mount Type: Eye 19mm
    • Adjustable Damping: Non-adjustable
    • Adjustable Length: No
  • Features:
    • Bilstein 4600 Series
    • Monotube Gas Pressure Construction
    • Improved Ride And Handling
    • Added Traction And Enhanced Stability
    • Increased Performance Even When Towing Heavy Loads
    • Vehicle Specific Ride Tuning
  • Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

This Part Fits the Following OEM/Substitute Numbers:
088568, 24184960, 320506, 48541-09030, 48541-39335, 48541-39345, 48541-A9010, 48541-A9020, 920506, 980-24-671, B46-2285, F4-B46-2285-H0, MX6131, RS5226, RS999226

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Drive Type CID
2001 - Toyota Tacoma V 3378 Rear Left 6 Cyl 3.4L Base 4WD -
Showing 1 - 10 of 47 products

Loading...