2003 Chevrolet Centerforce Parts

Choose a Model for your 2003 Chevrolet

Blazer Corvette S10 Silverado 2500 Silverado 2500 HD Silverado 3500

Showing 1 - 7 of 7 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Chevrolet Corvette Transmission Clutch and Flywheel Kit 8 Cyl 5.7L Centerforce

DYAD(R) DS 10.4; Clutch and Flywheel Kit
10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 1300 ft/lbs Trq.; 168 Teeth; Includes Pressure Plate/Discs/Flywheel
The Centerforce(R) DYAD(R) DS (Drive System) 10.4 Inch patented multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 500 to 1300 ft/lbs.
DYAD Clutch and Flywheel Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- No Complicated Setup Or Adjustments Required
- Fully Dampened Clutch Developed For Vehicles W/extreme Power
- Patented Ball Bearing Pressure Plate
- Patented Multi-disc Floating Disc And Drive Disc Design
- Quiet
- Positive Drive Floater
- Smooth Engagement And Light Pedal Effort
- Holds 500 To 1300 Ft/lbs Of Torque
- Precision Balanced
- Greater Longevity
- Arp Fasteners
- Excellent Driver Control
- Comes Preassembled For Your Convenience
The Centerforce(R) DYAD DS 10.4 in. twin disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1300 ft/lbs of torque at the crank. The pressure plate features our patented centrifugal weight system for superior clamp load over stock and our patented ball bearing actuated pressure plate providing light pedal effort. The discs are equipped with organic segmented facings providing increased holding capacity and the sprung/dampened drive disc provides smooth drivability. DYAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Components are designed, machined and assembled in the USA. DYAD DS clutches are match balanced and ready for installation using the included ARP fasteners.

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Engine	CID
2003 - Chevrolet Corvette	V	-	LS1	8 Cyl 5.7L	350

1 In Stock

$2,706.88 CAD

$3,248.26 CAD

Brand	Centerforce
Part #	C78413614842
Condition	New
Warehouse	B

2003 Chevrolet Corvette Transmission Clutch Kit Centerforce

Dual Friction(R); Clutch and Flywheel Kit
12 in. Dia.; 14 Bolt Pattern; 26 Spline; 1 1/8 in. Input Shaft; 700 ft/lbs Torque; 168 Teeth; Includes Pressure Plate/Clutch Disc/Flywheel
The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
Centerforce® Dual Friction Clutch Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:

Vehicle
2003 - Chevrolet Corvette

1 In Stock

$1,715.94 CAD

$2,059.13 CAD

Brand	Centerforce
Part #	C78KDF931042
Condition	New
Warehouse	B

2003 Chevrolet Corvette Transmission Clutch and Flywheel Kit 8 Cyl 5.7L Centerforce

SST 10.4; Clutch and Flywheel Kit
10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 925ft/lbs Trq.; 168 Teeth; Includes Pressure Plate/Discs/Floater/Flywheel/Pilot Bearings/Alignment Tool
The Centerforce(R) SST (Solid Street Twin) 10.4 Inch multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 400 to 925 ft/lbs.
SST Clutch And Flywheel Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Simple Install
Introducing the NEW Centerforce(R) SST (Solid Street Twin). The SST clutch system has been engineered and developed for vehicles producing 400 to 925 ft/lbs of torque. The SST 10.4 in. discs utilize solid hubs (possible gear noise) to reduce the rotational weight on the input shaft for quick clean shifts. The discs in this assembly are built using high quality friction materials, for smooth engagement and longevity. The SST features a lightened billet steel flywheel, providing low inertia resulting in quicker RPM and the Centerforce anti-rattle system to reduce floater rattle/noise. No complicated setup or adjustments required, just bolt it in and "Get a Grip". The Centerforce SST includes a billet steel flywheel, 2 discs, floater plate, pressure plate, pilot bearing, alignment tool, and ARP pressure plate and flywheel hardware. The SST clutch system is an economical choice for streetcar enthusiasts looking for a complete high-quality twin disc clutch system. This new clutch assembly can be used for everyday use and spirited days on the track.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2003 - Chevrolet Corvette	V	-	8 Cyl 5.7L	350

1 In Stock

$1,828.73 CAD

$2,194.48 CAD

Brand	Centerforce
Part #	C78412614842
Condition	New
Warehouse	B

2003 Chevrolet Corvette Clutch Pilot Bearing Centerforce

Centerforce(R) Accessories; Clutch Pilot Bearing
0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
Pilot Bearing
Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.094 In.
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Overall Length: 0.720 In.
Features:
- Pilot Bearing
Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.

Additional Fitment Information:

Vehicle
2003 - Chevrolet Corvette

Brand	Centerforce
Part #	C7843001
Condition	New
Warehouse	B

2003 Chevrolet Silverado 3500 Clutch Alignment Tool 8 Cyl 6.0L Centerforce

Centerforce(R) Accessories; Clutch Alignment Tool
10 Spline; 1 1/8 in. Input Shaft; 0.590 in. Diameter
The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.
Clutch Alignment Tool
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Clutch Alignment Tool
Alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application, leaving no need to replace the alignment tool with each clutch.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Chevrolet Silverado 3500	V	5967	8 Cyl 6.0L	LS	364

Brand	Centerforce
Part #	C7853010
Condition	New
Warehouse	B

2003 Chevrolet S10 Clutch Alignment Tool 4 Cyl 2.2L Centerforce

Centerforce(R) Accessories; Clutch Alignment Tool
26 Spline; 1 1/8 in. Input Shaft; 0.590 in. Diameter
The alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application.
Clutch Alignment Tool
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Clutch Alignment Tool
Alignment tools offered by Centerforce are standard alignment tools in black plastic. One alignment tool can be used for many different installations for the same application, leaving no need to replace the alignment tool with each clutch.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2003 - Chevrolet S10	L	2190	4 Cyl 2.2L	Xtreme	134

Brand	Centerforce
Part #	53026
Condition	New

2003 Chevrolet Corvette Clutch Pressure Plate and Disc Set Centerforce

Dual Friction(R); Clutch Pressure Plate and Disc Set
12 in. Dia.; 14 Bolt Pattern; 26 Spline; 1 1/8 in. Input Shaft; 700 ft/lbs Torque; Includes Pressure Plate/Clutch Disc
The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
Dual Friction® Clutch Pressure Plate And Disc Set
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Dual Friction[r] Design
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.