1984 Pontiac Moog Parts

Choose a Model for your 1984 Pontiac

Acadian Bonneville Fiero Firebird Grand Prix J2000 Sunbird Parisienne T1000

Showing 1 - 10 of 73 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1984 Pontiac Firebird Coil Spring Set - Front 8 Cyl 5.0L Moog

Coil Spring Set
with Air Conditioning Constant Rate Spring
MOOG 5276 Coil Spring Set
Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
  - 17.05
  - 433.10
- Wire Diameter:
  - 0.65
  - 16.70
- Front Spring Compressed Length:
  - 10.50
  - 266.70
- Rear Spring Compressed Length:
  - 10.50
  - 266.70
- Front Spring Outside Diameter: 5.410
- Front Spring Relaxed Length:
  - 17.05
  - 433.10
- Rear Spring Outside Diameter: 5.410
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:

277-3021, 3996362, 45H0088, 585-1088, 630.62072, 831-5276, 92-5276, 9781169, 9796979, CS5276, FCS5276S, SMS5276, U5276S

Additional Fitment Information:

Vehicle	Trans Type	Block	CC	Transmission	Position	Engine	Sub Model	CID
1984 - Pontiac Firebird	Transmission	V	-	Automatic	Front	8 Cyl 5.0L	Base	305

Brand	Moog
Part #	5276
Condition	New

UPC: 080066140681

1984 Pontiac Parisienne Steering Tie Rod End Adjusting Sleeve Moog

Tie Rod End Adjusting Sleeve
4.72 (in) Length with 11/16 (in) x 18 Threads
MOOG ES2004S Tie Rod End Adjusting Sleeve
Product Attributes:
- Length: 4.75
Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-84900, 0384900E, 0645217, 0928833, 12309226, 1474919, 1553703, 1634619, 26033090, 26048561, 26059034, 269-1109, 269-1113, 310252, 3200671, 3497704, 380013C01, 381484...VIEW MORE

Additional Fitment Information:

Vehicle
1984 - Pontiac Parisienne

Brand	Moog
Part #	ES2004S
Condition	New

UPC: 080066579078

1984 Pontiac Parisienne Suspension Ball Joint - Front Upper Moog

Ball Joint
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG K5208 Ball Joint
Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Castle Nut Included: Yes
- Mounting Type: Bolt-on
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

02-82008, 02-86021, 0282008E, 10233, 10268, 104231, 1268K, 14039014, 260-1091, 2601091FT, 282008, 286021, 305135, 31026, 325831, 335877, 335878, 335893...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Parisienne	Front Upper

Brand	Moog
Part #	K5208
Condition	New

UPC: 080066123745

1984 Pontiac Parisienne Suspension Ball Joint - Front Upper Moog

Ball Joint
MOOG K5208 Ball Joint
Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Castle Nut Included: Yes
- Mounting Type: Bolt-on
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Parisienne	Front Upper

Brand	Moog
Part #	K5208
Condition	New

UPC: 080066123745

1984 Pontiac Firebird Suspension Stabilizer Bar Link Kit - Front Moog

Stabilizer Bar Link Kit
Standard Design
MOOG K5252 Stabilizer Bar Link Kit
Product Attributes:
- Sleeve Length:
  - 1.220
  - 31.0
- End 1 Type: Bolt On
- Bolt Length:
  - 180.0
  - 7.086
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

06-82002, 06-82003, 11000, 14039143, 15571395, 15588797, 18060, 18074, 22598278, 265-1205, 265-1285, 265-1885, 265-1905, 265-1918, 265-2048, 265-2049, 45G0013, 464167...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Firebird	Front

Brand	Moog
Part #	K5252
Condition	New

UPC: 080066143057

1984 Pontiac Firebird Suspension Stabilizer Bar Link Kit - Rear Moog

Stabilizer Bar Link Kit
Standard Design
MOOG K5252 Stabilizer Bar Link Kit
Product Attributes:
- Sleeve Length:
  - 1.220
  - 31.0
- End 1 Type: Bolt On
- Bolt Length:
  - 180.0
  - 7.086
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Firebird	Rear

Brand	Moog
Part #	K5252
Condition	New

UPC: 080066143057

1984 Pontiac Parisienne Suspension Ball Joint - Front Lower Moog

Ball Joint
MOOG K6145T Ball Joint
Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Parisienne	Front Lower

Brand	Moog
Part #	K6145T
Condition	New

UPC: 080066271682

1984 Pontiac Parisienne Suspension Ball Joint - Front Lower Moog

Ball Joint
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG K6145T Ball Joint
Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

02-82009, 02-82032, 10277, 19122185, 22113159, 22145460, 22156500, 260-1096, 260-1130, 260-1130OS, 277K, 282009, 282032, 305153, 31024, 45D2026, 45D2027, 46D2026A...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Parisienne	Front Lower

Brand	Moog
Part #	K6145T
Condition	New

UPC: 080066271682

1984 Pontiac Parisienne Steering Tie Rod End - Outer Moog

Tie Rod End
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG ES2019RLT Tie Rod End
Product Attributes:
- Dust Boot Included: No
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.750
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-82019, 0382019E, 1208612, 12308612, 26056100, 269-2425, 269-2769, 310385, 382019, 401-1184, 401-1184B, 41039, 45A0184, 45A1084, 46A0184A, 52306272, 534-273, 612.66023...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1984 - Pontiac Parisienne	Outer

Brand	Moog
Part #	ES2019RLT
Condition	New

UPC: 080066542386

1984 Pontiac Parisienne Steering Tie Rod End - Outer Moog

Tie Rod End
MOOG ES2019RLT Tie Rod End
Product Attributes:
- Dust Boot Included: No
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.750
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.