1959 Plymouth Mr Gasket Parts

Choose a Model for your 1959 Plymouth

Belvedere Custom Fury Savoy Suburban

Showing 1 - 10 of 16 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1959 Plymouth Savoy Electric Fuel Pump Mr Gasket

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:

Vehicle
1959 - Plymouth Savoy

58 In Stock

$96.59 CAD

$115.91 CAD

Brand	Mr Gasket
Part #	G1212S
Condition	New
Warehouse	B

1959 Plymouth Custom Electric Fuel Pump Mr Gasket

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:

Vehicle
1959 - Plymouth Custom

58 In Stock

$96.59 CAD

$115.91 CAD

Brand	Mr Gasket
Part #	G1212S
Condition	New
Warehouse	B

1959 Plymouth Suburban Engine Intake Manifold Bolt Set 8 Cyl 5.2L Mr Gasket

Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers
Intake Manifold Bolts; Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers;
Intake Manifold Bolts
Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size: Universal Fit
Features:
- Zinc Plated
- Grade 5 Quality Steel
- Washers Included
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Suburban	V	5211	8 Cyl 5.2L	318

7 In Stock

$29.25 CAD

$35.10 CAD

Brand	Mr Gasket
Part #	G12955G
Condition	New
Warehouse	B

1959 Plymouth Belvedere Exhaust Header Bolt 8 Cyl 5.2L Mr Gasket

Self-Locking 2-In-1; Stainless Steel; Polish Finish; 12 piece
HEADLOCK Locking Header Bolts; Self-Locking 2-In-1; Stainless Steel; Polish Finish; 12 pc.;
HEADLOCK Locking Header Bolts
Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size:
  - Chevy Big Block
  - Chevy Small Block (262-400)
Features:
- Locking Header Bolt Set
- Metric
Headlock Bolts eliminate the need for lock washers, Period. Thats because each Headlock Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Belvedere	V	-	8 Cyl 5.2L	317

Brand	Mr Gasket
Part #	G122230G
Condition	New
Warehouse	B

1959 Plymouth Belvedere Exhaust Header Bolt 8 Cyl 5.2L Mr Gasket

Self-Locking 2-In-1; Stainless Steel; Polish Finish; 12 piece
HEADLOCK Locking Header Bolts; Self-Locking 2-In-1; Stainless Steel; Polish Finish; 12 pc.;
HEADLOCK Locking Header Bolts
Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size:
  - Chevy Big Block
  - Chevy Small Block (262-400)
Features:
- Locking Header Bolt Set
- Metric
Headlock Bolts eliminate the need for lock washers, Period. Thats because each Headlock Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Belvedere	V	5211	8 Cyl 5.2L	318

Brand	Mr Gasket
Part #	G122230G
Condition	New
Warehouse	B

1959 Plymouth Savoy Engine Intake Manifold Bolt Set 8 Cyl 5.2L Mr Gasket

12 Point Small Head; 3/8 in.-16 x 1in.; w/Washers Wedge Engine Only
Intake Manifold Bolts; 12 Point Small Head; 3/8 in.-16 x 1in.; w/Washers;
Intake Manifold Bolts
Product Attributes:
- WARNING CA Proposition 65: No
- Grade: 8
- Engine Make/Size:
  - Amc 304-401
  - Buick Small Block (300-350)
  - Chevy Small Block
  - Mopar 273-360
Features:
- Features 12-Point Smaller-Than-Standard Bolt Head
- Thick Flat Washers Distribute Optimum Clamp Load
- Ideal Use Where Space Is Minimal On Race Manifolds
- Bolts And Washers Zinc Plated For Protection
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. Theyre ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Savoy	V	5211	8 Cyl 5.2L	318

Brand	Mr Gasket
Part #	G126091
Condition	New
Warehouse	B

1959 Plymouth Suburban Wheel Bearing Dust Cap - Front Mr Gasket

Chrome; 1.790 in. Dia.; 2 piece
Dust Cap; Front; Chrome; 1.790 in. Dia.; 2 pc.;
Dust Cap
Product Attributes:
- WARNING CA Proposition 65: Yes
- Outside Diameter: 1.790 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Diameter (in.): 1.790 In.
- Package Quantity: 2
Features:
- Add A Finished Look
- Heavy Chrome Plated
- Easy Installation
- 2 Per Set
If you have custom steel or mag wheels that are not designed without a provision for a center cap, youre probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Additional Fitment Information:

Vehicle	Position
1959 - Plymouth Suburban	Front

Brand	Mr Gasket
Part #	G122485
Condition	New
Warehouse	B

1959 Plymouth Suburban Engine Intake Manifold Bolt Set 8 Cyl 5.2L Mr Gasket

12 Point Small Head; 3/8 in.-16 x 1in.; w/Washers Wedge Engine Only
Intake Manifold Bolts; 12 Point Small Head; 3/8 in.-16 x 1in.; w/Washers;
Intake Manifold Bolts
Product Attributes:
- WARNING CA Proposition 65: No
- Grade: 8
- Engine Make/Size:
  - Amc 304-401
  - Buick Small Block (300-350)
  - Chevy Small Block
  - Mopar 273-360
Features:
- Features 12-Point Smaller-Than-Standard Bolt Head
- Thick Flat Washers Distribute Optimum Clamp Load
- Ideal Use Where Space Is Minimal On Race Manifolds
- Bolts And Washers Zinc Plated For Protection
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. Theyre ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Suburban	V	5211	8 Cyl 5.2L	318

Brand	Mr Gasket
Part #	G126091
Condition	New
Warehouse	B

1959 Plymouth Suburban Engine Coolant Thermostat 8 Cyl 5.2L Mr Gasket

160 deg.; Race Only
High Performance Thermostat; 160 deg.; Race Only;
High Performance Thermostat
Product Attributes:
- Temperature: 160° F
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Diameter (in.): 2.480 In.
Features:
- High Performance
- Resists Variations In Coolant
- Brass and Copper Construction
- Opens At Right Temperature
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1959 - Plymouth Suburban	V	5211	8 Cyl 5.2L	318

Brand	Mr Gasket
Part #	4366
Condition	New

1959 Plymouth Belvedere Engine Coolant Thermostat 8 Cyl 5.2L Mr Gasket

160 deg.; Race Only
High Performance Thermostat; 160 deg.; Race Only;
High Performance Thermostat
Product Attributes:
- Temperature: 160° F
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Diameter (in.): 2.480 In.
Features:
- High Performance
- Resists Variations In Coolant
- Brass and Copper Construction
- Opens At Right Temperature
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.