1982 Ford Mr Gasket Parts


Showing 1 - 10 of 28 products
Image
SKU
Product
Rating
Price

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Ford Bronco L 4917 6 Cyl 4.9L 300

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1982 - Ford Bronco V 5753 8 Cyl 5.8L Windsor 351

Mr Gasket
  • 160 deg.; Race Only
  • High Performance Thermostat; 160 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 160° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.120 In.
  • Features:
    • High Performance
    • Resists Variations In Coolant
    • Brass and Copper Construction
    • Opens At Right Temperature
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Ford E-100 Econoline V - 8 Cyl 5.0L 302

Mr Gasket
  • 160 deg.; Race Only
  • High Performance Thermostat; 160 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 160° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.120 In.
  • Features:
    • High Performance
    • Resists Variations In Coolant
    • Brass and Copper Construction
    • Opens At Right Temperature
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Ford Bronco V - 8 Cyl 5.0L 302

Mr Gasket
  • 180 deg.; Race Only
  • High Performance Thermostat; 180 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 180° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.120 In.
  • Features:
    • Rated To Open At 180 Degrees
    • Opens At Right Temperature Regardless Of RPM
    • Brass and Copper Construction
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1982 - Ford E-100 Econoline V 5753 8 Cyl 5.8L Windsor 351

Mr Gasket
  • 180 deg.; Race Only
  • High Performance Thermostat; 180 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 180° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.120 In.
  • Features:
    • Rated To Open At 180 Degrees
    • Opens At Right Temperature Regardless Of RPM
    • Brass and Copper Construction
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1982 - Ford Bronco V 5753 8 Cyl 5.8L Windsor 351

Mr Gasket
  • w/Mounting Gasket; 90 deg. Angled Neck
  • Water Neck; w/Mounting Gasket; 90 deg. Angled Neck;
  • Water Neck
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Chrome Plated For Great Looks
    • Features An O-Ring Seal To Prevent Leaking
  • Precision die cast, these water necks or thermostat housings are first polished to a high luster, then chrome plated. Comes with gasket and Allen head mounting bolts. Fits 1979-1997 Ford 5.0/5.8L V8s.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Ford E-100 Econoline V - 8 Cyl 5.0L 302

Mr Gasket
  • w/Mounting Gasket; 90 deg. Angled Neck
  • Water Neck; w/Mounting Gasket; 90 deg. Angled Neck;
  • Water Neck
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Chrome Plated For Great Looks
    • Features An O-Ring Seal To Prevent Leaking
  • Precision die cast, these water necks or thermostat housings are first polished to a high luster, then chrome plated. Comes with gasket and Allen head mounting bolts. Fits 1979-1997 Ford 5.0/5.8L V8s.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Ford Bronco V - 8 Cyl 5.0L 302

Mr Gasket
  • Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
  • Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
  • Exhaust Gasket Set
  • Product Attributes:
    • Gasket Line: Performance
    • WARNING CA Proposition 65: No
    • Port Shape: Rectangle
    • Collector Gaskets Included: No
    • Engine Make/Size: Ford Small Block Windsor
    • Thickness: 0.062 In.
    • Port Size: 1.120 In. X 1.480 In.
  • Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Excellent Sealing Durability And Torque Retention
    • Superior Tensile Strength
  • Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1982 - Ford Bronco V 5753 8 Cyl 5.8L Windsor 351

Mr Gasket
  • Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
  • Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
  • Exhaust Gasket Set
  • Product Attributes:
    • Gasket Line: Performance
    • WARNING CA Proposition 65: No
    • Port Shape: Rectangle
    • Collector Gaskets Included: No
    • Engine Make/Size: Ford Small Block Windsor
    • Thickness: 0.062 In.
    • Port Size: 1.120 In. X 1.480 In.
  • Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Excellent Sealing Durability And Torque Retention
    • Superior Tensile Strength
  • Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

This Part Fits the Following OEM/Substitute Numbers:
1415

Additional Fitment Information:
Vehicle Block CC Engine Engine Version CID
1982 - Ford Bronco V 5753 8 Cyl 5.8L Modified 351
Showing 1 - 10 of 28 products

Loading...