2010 Chevrolet Rough Country Parts


Showing 1 - 10 of 311 products
Image
SKU
Product
Rating
Price

Rough Country
  • 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
  • U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
  • U-Bolt Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
    • Tapered To Reduce Drive Shaft Angle
    • Single 9/16 in. Pin Blocks
    • 2.5 in. Wide
    • Powder Coated Black
    • U-Bolts Are E-Coated Black
    • Corrosion Resistant
  • Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat.  Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!

Additional Fitment Information:
Vehicle Sub Model
2010 - Chevrolet Silverado 1500 LTZ

Rough Country
  • Rear; 7-8 in.; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 30.08 in.; Collapsed Length 17.87 in.; w/7 - 8 in. Lift
  • N3 Shocks; Rear; 7-8 in.; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 30.08 in.; Collapsed Length 17.87 in.;
  • N3 Shocks
  • Product Attributes:
    • Collapsed Length: 17.870 In.
    • Shock Stroke: 12.210 In.
    • WARNING CA Proposition 65: No
    • Extended Length: 30.080 In.
  • Features:
    • 10-Stage Variable Valving
    • High Pressure Nitrogen Charged
    • 35mm Piston
    • Chromed Hardened 18mm Piston Rod
    • 54mm Shock Body To Dissipate Heat Faster
    • 36kN Tensile Strength
    • Spring Loaded Piston Rod Seal
    • Military Spec. Fluid Rated To 40 Deg. C
    • Rubber Bushings For Better Absorption
    • Metallic Silver Paint
    • Free Shipping
    • 3-Year Manufacturers Warranty
  • Improve your on and off-road ride quality with Rough Countrys premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.

Additional Fitment Information:
Vehicle Position Sub Model
2010 - Chevrolet Tahoe Rear LT

Rough Country
  • Pair; Forged; Tie Rod Assemblies
  • Heavy Duty Tie Rod Kit; Pair; Forged; Tie Rod Assemblies;
  • Heavy Duty Tie Rod Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Heavy Duty Replacement Tie Rod Assemblies. Bend Resistant
    • Replaces The OE Inner And Outer Tie Rod Assembly
    • Sold In Pairs
    • Forged SAE1045 Steel Outer Tie Rod With Heat-Treated 4140 Ball Stud
    • 4140 Inner Adjustment Shaft With A SAE1045 Steel Ball-Joint Housing
    • 22mm Adjustment Threads
  • Dont settle for weak tie rods! You want your steering and suspension to be as strong as the truck you love. Thats why you need Rough Countrys HD Forged Tie Rod Kit. This upgrade is a great replacement for stock parts, especially if youre going off-road or towing a heavy load. Our tie rod ends give you a smoother ride, better turn-in response, and increased safety. Because sometimes stock just isn't strong enough and Reliable. You never know what kind of terrain you'll encounter or what obstacles may get in your way. Thats why you can rely on the rugged durability of our HD Tie Rod Kit to keep you going where you need to go. They are bend-resistant, have 22mm adjustment threads, and replace the inner, and outer tie rod ends. These heavy-duty tie rod end assemblies are made with forged steel and include an adjustable shaft and steel ball-joint housing. With these heavy-duty replacements, you can keep your vehicle on the road and out of the shop. Installation Rough Countrys Tie Rod Kit is a no-cutting, bolt-on installation. Warranty. Rough Countrys HD Forged Tie Rod Kit comes with our industry-leading warranty.

Additional Fitment Information:
Vehicle Drive Type
2010 - Chevrolet Silverado 3500 HD 4WD

Rough Country
  • Lug Nut Set; M12x1.5; Set Of 24; Chrome; Open End
  • Wheel Installation Kit; Lug Nut Set; M12x1.5; Set Of 24; Chrome; Open End;
  • Wheel Installation Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Bulge Acorn Type Lug Nuts
    • Thread Size M12X1.5
    • Includes Socket Key For Easy Installation And Removal
    • Cold Forged Carbon Steel With Enhanced Rigidity
    • Long Lasting Finish
    • Exceeds OEM Standard In Material/Strength/Hardness
    • Corrosion Resistant
    • Easy To Install

Additional Fitment Information:
Vehicle
2010 - Chevrolet Colorado

Rough Country
  • 1 pc.; 20x9 [6x5.5/6x135]
  • Series 93 Wheel; 1 pc.; 20x9 [6x5.5/6x135];
  • Series 93 Wheel
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Wheel Width: 20
    • Size: 20x9
    • Wheel Diameter: 9
    • Backspace: 5
    • Bolt Pattern:
      • 6x135
      • 6x5.5
  • Features:
    • Matte Black W/milled Accents Finish
    • 7-spoke Design
    • Single-piece Aluminum Construction
    • Super Light Wheel
    • Includes A Rough Country Carbon Fiber Design Center Cap
    • Backed By A 1-year Finish
    • Limited Lifetime Structural Warranty
  • Set yourself apart from the pack with Rough Countrys One-Piece Series 93 Wheels. This 7-spoke black and machined wheel offers an incredible look thats sure to turn heads. This one-of-a-kind wheel features 7 spokes that flare out near the lip for a dramatic visual style thats perfect for any lifted vehicle. This stylish wheel features a gloss black coat with machined accents that pop under any truck or Jeep.Rough Countrys Series 93 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance. Each Series 93 Wheel includes dual machined 'œRough Country' logos and a center cap with 'œRC' carbon fiber logo design and includes a limited lifetime warranty.

Additional Fitment Information:
Vehicle Sub Model
2010 - Chevrolet Silverado 1500 WT

Rough Country
  • 1 pc.; 20x9 [6x5.5/6x135]
  • Series 94 Wheel; 1 pc.; 20x9 [6x5.5/6x135];
  • Series 94 Wheel
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Wheel Width: 20
    • Size: 20x9
    • Wheel Diameter: 9
    • Backspace: 5
    • Bolt Pattern:
      • 6x135
      • 6x5.5
  • Features:
    • Matte Black W/milled Accents Finish
    • 7-spoke Design
    • Single-piece Aluminum Construction
    • Super Light Wheel
    • Includes A Rough Country Carbon Fiber Design Center Cap
    • Backed By A 1-year Finish
    • Limited Lifetime Structural Warranty
  • Give your vehicle an aggressive, new look with Rough Countrys One-Piece Series 94 Wheels. This 8-spoke black and machined wheel offers an incredible look thats sure to turn heads.This wheel features 8 spokes for a dramatic visual style thats perfect for any lifted vehicle. This spoke design allows you to see more of the components behind the wheel for a sporty look and feel. This stylish wheel features a black coat with machined accents that pop under any truck or Jeep.Rough Countrys Series 94 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance.Each Series 94 Wheel includes stamped 'œRough Country' logos and a center cap with 'œRC' carbon fiber logo design as well as a limited lifetime warranty.

Additional Fitment Information:
Vehicle Sub Model
2010 - Chevrolet Silverado 1500 LT

Rough Country
  • 20x10 [6x5.5]
  • One-Piece Series 95 Wheel; 20x10 [6x5.5];
  • One-Piece Series 95 Wheel
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Wheel Width: 20
    • Size: 20x10
    • Wheel Diameter: 10
    • Backspace: 4.5
  • Features:
    • Matte Black Finish
    • 8 Spoke Design
    • Single Piece Aluminum Construction Delivers A Super Strong
    • Includes A Rough Country Black Cap
    • Backed By A 1 Year Finish
  • Set yourself apart from the pack with Rough Country's One-Piece Series 95 Wheels. This 8-spoke black and machined wheel offers an incredible look that's sure to turn heads. This one-of-a-kind wheel features 8 spokes that flare out near the lip for a dramatic visual style that's perfect for any lifted vehicle. This stylish wheel features a gloss black finish to add that pop under any truck or Jeep.Rough Country's Series 95 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance. Each Series 95 Wheel includes an embeded â??Rough Countryâ? logo and a black center cap with â??RCâ? logo design and includes a limited lifetime warranty.

Additional Fitment Information:
Vehicle Sub Model
2010 - Chevrolet Silverado 1500 WT

Rough Country
  • Rear; 3-4.5 in.; Monotube; 25.98 in. Extended Length; 16.34 in. Collapsed Length; w/3 - 4.5 in. Lift
  • M1 Shock Absorber; Rear; 3-4.5 in.; Monotube; 25.98 in. Extended Length; 16.34 in. Collapsed Length;
  • M1 Shock Absorber
  • Product Attributes:
    • Collapsed Length: 16.340 In.
    • Shock Stroke: 9.640 In.
    • WARNING CA Proposition 65: No
    • Extended Length: 25.980 In.
  • Features:
    • 2 in. Seamless Extruded Tube
    • 46mm Digressive Piston
    • Self-Adjusting Deflective-Disc Independent Rebound And Compression
    • 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
    • 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
    • Digressive Valving Instantly Reacts To Changing Surface Conditions
    • Zinc Plated For Resistance Against Harsh Elements
    • Available In Various Lift Heights For Multiple Applications
    • Durable Vulcanized Natural Rubber Bushings
    • Free Shipping
    • 3 Year Manufacturer Warranty
  • Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.

Additional Fitment Information:
Vehicle Position Sub Model
2010 - Chevrolet Tahoe Rear Hybrid

Rough Country
  • Rear; 5-6.5 in.; Monotube; 28.04 in. Extended Length; 16.47 in. Collapse Length; w/5 - 6.5 in. Lift
  • M1 Shock Absorber; Rear; 5-6.5 in.; Monotube; 28.04 in. Extended Length; 16.47 in. Collapse Length;
  • M1 Shock Absorber
  • Product Attributes:
    • Collapsed Length: 16.470 In.
    • Shock Stroke: 11.570 In.
    • WARNING CA Proposition 65: No
    • Extended Length: 28.040 In.
  • Features:
    • 2 in. Seamless Extruded Tube
    • 46mm Digressive Piston
    • Self-Adjusting Deflective-Disc Independent Rebound And Compression
    • 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
    • 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
    • Digressive Valving Instantly Reacts To Changing Surface Conditions
    • Zinc Plated For Resistance Against Harsh Elements
    • Available In Various Lift Heights For Multiple Applications
    • Durable Vulcanized Natural Rubber Bushings
    • Free Shipping
    • 3 Year Manufacturer Warranty
  • Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.

Additional Fitment Information:
Vehicle Position Sub Model
2010 - Chevrolet Tahoe Rear LT

Rough Country
  • Rear; 7-8 in.; Monotube; 30.08 in. Extended Length; 18.5 Collapsed Length; w/7 - 8 in. Lift
  • M1 Shock Absorber; Rear; 7-8 in.; Monotube; 30.08 in. Extended Length; 18.5 Collapsed Length;
  • M1 Shock Absorber
  • Product Attributes:
    • Collapsed Length: 18.500 In.
    • Shock Stroke: 11.580 In.
    • WARNING CA Proposition 65: No
    • Extended Length: 30.080 In.
  • Features:
    • 2 in. Seamless Extruded Tube
    • 46mm Digressive Piston
    • Self-Adjusting Deflective-Disc Independent Rebound And Compression
    • 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
    • 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
    • Digressive Valving Instantly Reacts To Changing Surface Conditions
    • Zinc Plated For Resistance Against Harsh Elements
    • Available In Various Lift Heights For Multiple Applications
    • Durable Vulcanized Natural Rubber Bushings
    • Free Shipping
    • 3 Year Manufacturer Warranty
  • Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.

Additional Fitment Information:
Vehicle Position Sub Model
2010 - Chevrolet Tahoe Rear LTZ
Showing 1 - 10 of 311 products

Loading...