2012 Fiat Belts and Cooling Parts

Choose a Model for your 2012 Fiat

500 Ducato Panda

Showing 1 - 10 of 35 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2012 Fiat 500 Hose Clamp Crown Automotive

Tension Clamp; 23mm x 15mm Heater Core Hose
Hose Clamp; Tension Clamp; 23mm x 15mm;
Hose Clamp
Product Attributes:
- WARNING CA Proposition 65: No
- Size: 23mm X 15mm
Features:
- Hose Clamp
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
2012 - Fiat 500

4 In Stock

$9.85 CAD

$11.82 CAD

Brand	Crown Automotive
Part #	C1Y32003300AB
Condition	New
Warehouse	B

2012 Fiat 500 Engine Cooling Fan Controller Derale

Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
Electric Fan Controller
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.

Additional Fitment Information:

Vehicle
2012 - Fiat 500

17 In Stock

$98.22 CAD

$117.86 CAD

Brand	Derale
Part #	D6516749
Condition	New
Warehouse	B

2012 Fiat 500 Engine Cooling Fan Controller Derale

High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
Electric Fan Controller
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.

Additional Fitment Information:

Vehicle
2012 - Fiat 500

11 In Stock

$211.00 CAD

$253.20 CAD

Brand	Derale
Part #	D6516789
Condition	New
Warehouse	B

2012 Fiat 500 Engine Coolant Thermostat Housing Assembly 4 Cyl 1.4L Dorman

Integrated Thermostat Housing Assembly With Sensor
Cover Includes Thermostat and Sensor
Product Attributes:
- Bolt Hole Center To Bolt Hole Center: 2.689
- Flange Length: 3.5
- Thermostat Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Thermostat Housing; 1 Thermostat; 1 Sensor; 1 Gasket
- Bleeder Hole: No
- Flange Thickness: 0.4
- Mounting Hole Quantity: 2
- Inside Diameter: 0.7
- Thermostat Opening Temperature:
  - 176 Deg. F
  - 176 Deg. F.
- Gasket Type: Gasket
- Flange Width: 1.85
Features:
- Ideal replacement - this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

This Part Fits the Following OEM/Substitute Numbers:

34816, 4892642AA, 4892642AB, 4892642AD, 757-176, 75776

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2012 - Fiat 500	L	1368	4 Cyl 1.4L	83

1 In Stock

$54.47 CAD

$65.36 CAD

Brand	Dorman
Part #	D18902-3041
Condition	New
Warehouse	B

2012 Fiat 500 Radiator Coolant Hose - Upper Gates

2012 Fiat 500 Radiator Coolant Hose - Upper Gates

Molded

Additional Fitment Information:

Vehicle	Position	Aspiration
2012 - Fiat 500	Upper	Naturally Aspirated

1 In Stock

$83.86 CAD

$100.63 CAD

Brand	Gates
Part #	GAT1921913
Condition	New
Warehouse	A

2012 Fiat 500 Engine Coolant Reservoir Hose - Upper Mopar

2012 Fiat 500 Engine Coolant Reservoir Hose - Upper Mopar

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Position	Aspiration
2012 - Fiat 500	Upper	Naturally Aspirated

6 In Stock

$30.63 CAD

$36.76 CAD

Brand	Mopar
Part #	MPR2169128
Condition	New
Warehouse	A

2012 Fiat Ducato Serpentine Belt - Air Conditioning 4 Cyl 2.3L Gates

Premium OE Stretch Fit Micro-V Belt
Product Attributes:
- Top Width:
  - .56
  - 14
- Outside Circumference:
  - 36
  - 916
- Instruction Manual Included: Sheet A
- OE Comparison Rating: Oe Exact
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
  - 35.51
  - 902
- Rib Quantity: 4
- Cord Material: Nylon
- Installation Tools Requirements: Special Installation Tool

This Part Fits the Following OEM/Substitute Numbers:

12603509, 12624100, 19178068, 19210691, 19210961, 2249471, 25-040355SF, 4040355S, 4K355SF, 4PK939 (STRETCH FIT), 8126241000, 8192106910, E040357, EB009, JX6E 6C301 BA, JX6Z 8620 E, K040355SF

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
2012 - Fiat Ducato	L	2287	Air Conditioning	DIESEL	4 Cyl 2.3L	140

Brand	Gates
Part #	GRCK040355SF
Condition	New
Warehouse	B

UPC: 770075392040

2012 Fiat Panda Radiator Cap 4 Cyl 1.2L Motorad

Radiator cap
Relief pressure 22 lb
Standard
Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
  - No
  - Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2012 - Fiat Panda	L	1242	4 Cyl 1.2L	76

Brand	Motorad
Part #	C97T22
Condition	New
Warehouse	B

2012 Fiat 500 Engine Coolant Reservoir Cap 4 Cyl 1.4L Motorad

Radiator cap
Relief pressure 22 lb
Standard
Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
  - No
  - Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

This Part Fits the Following OEM/Substitute Numbers:

10372, 10392, 17022, 31557, 31559, 380178, 5183710AA, 7022, 9T22, P7022, T22

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2012 - Fiat 500	L	1368	4 Cyl 1.4L	83

Brand	Motorad
Part #	C97T22
Condition	New
Warehouse	B

2012 Fiat 500 Engine Cooling Fan Derale

12in. Tornado Electric Puller Fan; Standard Mounting Kit
880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
12in. Tornado Electric Fan; Standard Kit
Tornado Electric Puller Fan
Product Attributes:
- Diameter (in.): 12.000 In.
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.