1996 Subaru Engine Parts

Choose a Model for your 1996 Subaru


Showing 1 - 10 of 220 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In. -6h
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.800 Lbs. (0.3 Kg)
    • Product Box Height: 4.000 In. (102mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.190 In. (81mm)
    • Package Material: Paperboard
    • Product Box Length: 3.190 In. (81mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.156 In. (80mm)
    • Removal Nut: Yes
    • Item Height: 3.406 In. (87mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Subaru SVX H 3318 6 Cyl 3.3L -

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Subaru Legacy H 2458 4 Cyl 2.5L -

Dayco
  • Recommended Replacement 60,000 miles, Normal Driving Conditions Water Pump Driven by Timing Belt without California Emissions
  • Timing Belt
  • Product Attributes:
    • : Yes
    • Top Width:
      • 1.19
      • 30
    • Tooth Pitch:
      • .31496
      • 8.000
    • Construction: Std Temp And Load
    • Timing Marks: Yes
    • Effective Length:
      • 1688
      • 66.46
    • Tooth Profile: Round Tooth

This Part Fits the Following OEM/Substitute Numbers:
026-0286, 13028-AA101, 13028-AA102, 25-90172, 250172, 40172, 95172, B172, CD-172, T172, TB-172, TB172

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1996 - Subaru Legacy H 2212 Camshaft 4 Cyl 2.2L -

Gates
  • Oil Filler Cap
  • Product Attributes:
    • OE Comparison Rating: Oe Exact
    • Shell Outside Diameter: 2.6
    • Neck Diameter: 1.58
    • Cam Type: Screw On
    • Cap Neck Depth: 1.19
    • Width: 2.6
    • Height: 1.23

This Part Fits the Following OEM/Substitute Numbers:
10110, 11110, 15255AA020, 15255AA021, 15255AA022, 15255AA040, 15255AA100, 15255AA161, 15255KA111, 31119, 36053, 46554, 703-1457, 8110, MO-110

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1996 - Subaru Legacy H 2212 GAS 4 Cyl 2.2L -

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.15
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 280
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331, 0370-23802...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1996 - Subaru Legacy H 2458 United States 4 Cyl 2.5L -

Wix
  • WIX Spin-On Lube Filter
  • Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.15
    • Duty Type: Ld
    • Micron: 19.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 280
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
1334MP, 21334MP, 3593A, 51334MP, 520532091, 61334BP, 618-51334MP, 85334MP, B4459MP, LF3462, PH2808B, PH3593AFP, PH9688FP, R85334MP, V4459BP

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1996 - Subaru Impreza H 1781 Canada 4 Cyl 1.8L -

DEA Strut
  • Engine Mount
  • OEM Replacement

This Part Fits the Following OEM/Substitute Numbers:
32007088, 32007089, 32011446, 41022AC110, 41022FA000, 41022FA001, 41022FA091, 41022FA092, 41022FE040, 600024, 9024, A6709, B9024, EM-9024

Additional Fitment Information:
Vehicle Block CC Transmission Position Engine Drive Type CID
1996 - Subaru Legacy H 2212 Automatic Front Right 4 Cyl 2.2L AWD -

Dorman
  • Harmonic Balancer Assembly
  • Product Attributes:
    • Color/Finish: Black
    • Grade Type: Regular
    • Package Contents: Balancer; Woodruff Key; Instruction Sheet
    • Degree Markings: Yes
    • Drive Belt Type: Serpentine
  • Features:
    • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
    • Durable construction - stringent specifications and careful construction help ensure longevity
    • Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
    • Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
  • This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

This Part Fits the Following OEM/Substitute Numbers:
102126, 12305AA121, 12305AA130, 12305AA210, 12305AA242, 12305AA243, 594129, DA205, P-SUB2458, PB1164N, PC-7900, SK594129

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Subaru Impreza H 2212 4 Cyl 2.2L -

Dorman
  • Harmonic Balancer Assembly
  • Code G (9th Digit of Model Plate)
  • Product Attributes:
    • Color/Finish: Black
    • Grade Type: Regular
    • Package Contents: Balancer; Woodruff Key; Instruction Sheet
    • Degree Markings: Yes
    • Drive Belt Type: Serpentine
  • Features:
    • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
    • Durable construction - stringent specifications and careful construction help ensure longevity
    • Thoroughly tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing
    • Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
  • This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Subaru Legacy H 2212 4 Cyl 2.2L -

Motorad
  • Engine Oil Filler Cap
  • Product Attributes:
    • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
    • Vented: No
    • Neck Diameter: 1.58 In
    • Shell Diameter: 2.60 In
  • Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

This Part Fits the Following OEM/Substitute Numbers:
10110, 11110, 12C11, 14110, 15255AA020, 15255AA021, 15255AA022, 15255AA040, 15255AA080, 31119, 703-1853, 8110, 9MO110, MO110, P8110

Additional Fitment Information:
Vehicle Block CC Engine CID
1996 - Subaru Legacy H 2212 4 Cyl 2.2L -
Showing 1 - 10 of 220 products

Loading...