Shop By Product Matching "MPA"


Showing 1 - 10 of 213 products
Image
SKU
Product
Rating
Price

Delphi
  • Fuel Pump Module Assembly
  • If part that is being replaced has a 1x4 connector, wire harness FA10004 is required, not included Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 7
    • Voltage: 12.0
    • Maximum Pressure: 101.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Resistance Ohms Full: 250.0
    • Outlet Outside Diameter: 0.375
    • Terminal Quantity: 4
    • Outlet Quantity: 3
    • Internal Or External Strainer: Internal
    • Resistance Ohms Empty: 40.0
    • System Pressure: 59 Psi
    • Terminal Type: Blade
    • Fuel Level Sender Assembly Included: Yes
    • Vapor Pressure Sensor: Yes
    • Terminal Gender: Male
    • Lock Ring Included: Yes
    • Average Flow Rating: 21
    • Regulator Included: No
    • Strainer Included: Yes
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
1AMFP00005, 22631715, 22669454, 22683260, 67475, 88957239, 88967292, 88967294, 953-0023, 953-5122, 9535122, A43003, AFS0544S, D5341008, E3507M, FFG0375, FP22008S, M212873...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Pontiac Grand Am V - 6 Cyl 3.4L 207

Delphi
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 7
    • Voltage: 12.0
    • Maximum Pressure: 90.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Resistance Ohms Full: 20.0
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 4
    • Outlet Quantity: 2
    • Internal Or External Strainer: External
    • Resistance Ohms Empty: 270.0
    • System Pressure: 49 Psi
    • Terminal Type: Blade
    • Fuel Level Sender Assembly Included: Yes
    • Vapor Pressure Sensor: No
    • Terminal Gender: Male
    • Lock Ring Included: No
    • Average Flow Rating: 26
    • Regulator Included: No
    • Strainer Included: Yes
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
5012 380AD, 5012 380AE, 5012380AD, 5018 056AA, 5018 056AB, 5018 056AC, 5018 056AD, 5018 060AA, 5018056AC, 5072 266AA, 5093 804AA, 67662, 67721, 69316, 950-0199, 953-3041, A36000, AFS0571S...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Jeep Grand Cherokee L - 6 Cyl 4.0L 242

Carter
  • Fuel Pump Module Assembly
  • Except Export with Turbine Pump Technology ; Includes Tank Seal, Connectors, and Wire Harness
  • Product Attributes:
    • Fuel Filter Included: No
    • Connector Gender: Female
    • Voltage: 12v
    • Negative Ground: Yes
    • Grade Type: Regular
    • Mounting Hardware Included: No
    • Wiring Harness Length: 445.0
    • Connector Shape: Oval
    • Fuel Tank Pressure Sensor Included: No
    • Minimum Pressure: 60.0
    • Resistance Ohms Empty: 40.0
    • Lock Ring Included: No
    • Top Mount Diameter: 94.0
    • Wire Quantity: 4
    • Pump Type: Electric
    • Resistance Ohms Full: 250.0
    • Wire Harness Included: Yes
    • Fuel Sending Unit Included: Yes
    • Outlet Outside Diameter: 9.49
    • Terminal Quantity: 4
    • Internal Or External Strainer: External
    • Connector Color: White
    • Terminal Type: Spade
    • Terminal Gender: Male
    • Regulator Included: No
    • Outlet Fitting Thread Size: 3/8
    • Strainer Included: Yes
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Additional Fitment Information:
Vehicle Block CC Doors Engine CID
2004 - GMC Jimmy V 4294 4 6 Cyl 4.3L -

Carter
  • Fuel Pump Module Assembly
  • with Turbine Pump Technology; Includes Tank Seal, Connectors, and Wire Harness
  • Product Attributes:
    • Fuel Filter Included: No
    • Connector Gender: Female
    • Voltage: 12v
    • Negative Ground: Yes
    • Grade Type: Regular
    • Mounting Hardware Included: No
    • Wiring Harness Length: 445.0
    • Connector Shape: Oval
    • Fuel Tank Pressure Sensor Included: No
    • Minimum Pressure: 60.0
    • Resistance Ohms Empty: 40.0
    • Lock Ring Included: No
    • Top Mount Diameter: 94.0
    • Wire Quantity: 4
    • Pump Type: Electric
    • Resistance Ohms Full: 250.0
    • Wire Harness Included: Yes
    • Fuel Sending Unit Included: Yes
    • Outlet Outside Diameter: 9.49
    • Terminal Quantity: 4
    • Internal Or External Strainer: External
    • Connector Color: White
    • Terminal Type: Spade
    • Terminal Gender: Male
    • Regulator Included: No
    • Outlet Fitting Thread Size: 3/8
    • Strainer Included: Yes
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

This Part Fits the Following OEM/Substitute Numbers:
150019, 19177220, 19179591, 19331269, 19331274, 237711, 25176789, 25314067, 25344818, 25347147, 2630305, 2920054, 402-P3992M, 530-2320, 953-0021, 953-5125, A30026, AFS0481S...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Doors Engine CID
2004 - Chevrolet Blazer V - 4 6 Cyl 4.3L 262

Moog
  • Non-Greaseable Super Strength Universal Joint
  • 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
  • MOOG Non-Greaseable Super Strength 231 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: No
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lubricateable: No
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP

Additional Fitment Information:
Vehicle Position Drive Type
2004 - GMC Savana 1500 At Transmission RWD

Moog
  • Greaseable Super Strength Universal Joint
  • with 3 Joint Driveshaft 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 270 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter A - mm: 27.0
    • Length Axis 1:
      • 3.62
      • 91.9
    • Length Axis 2:
      • 3.62
      • 91.9
    • Length A - Inch: 3.62
    • OE Series: Spicer 1330
    • Length A - mm: 91.9
    • Bearing Diameter A - Inch: 1.063
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter B - Inch: 1.063
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.62
    • Length B - mm: 91.9
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 27.0
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
215-0354, 45U0115

Additional Fitment Information:
Vehicle Position Drive Type
2004 - Dodge Ram 1500 Rear Driveshaft at Support Bearing 4WD

Moog
  • Greaseable Super Strength Universal Joint
  • with 3 Joint Driveshaft 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 270 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter A - mm: 27.0
    • Length Axis 1:
      • 3.62
      • 91.9
    • Length Axis 2:
      • 3.62
      • 91.9
    • Length A - Inch: 3.62
    • OE Series: Spicer 1330
    • Length A - mm: 91.9
    • Bearing Diameter A - Inch: 1.063
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter B - Inch: 1.063
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.62
    • Length B - mm: 91.9
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 27.0
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Drive Type
2004 - Dodge Dakota At Center Bearing RWD

Moog
  • Greaseable Super Strength Universal Joint
  • 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 270 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter A - mm: 27.0
    • Length Axis 1:
      • 3.62
      • 91.9
    • Length Axis 2:
      • 3.62
      • 91.9
    • Length A - Inch: 3.62
    • OE Series: Spicer 1330
    • Length A - mm: 91.9
    • Bearing Diameter A - Inch: 1.063
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter B - Inch: 1.063
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.62
    • Length B - mm: 91.9
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 27.0
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Drive Type
2004 - Ford Explorer Rear Driveshaft at Transmission AWD

Moog
  • Greaseable Super Strength Universal Joint
  • 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 270 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter A - mm: 27.0
    • Length Axis 1:
      • 3.62
      • 91.9
    • Length Axis 2:
      • 3.62
      • 91.9
    • Length A - Inch: 3.62
    • OE Series: Spicer 1330
    • Length A - mm: 91.9
    • Bearing Diameter A - Inch: 1.063
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter B - Inch: 1.063
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.62
    • Length B - mm: 91.9
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 27.0
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Drive Type
2004 - Ford Explorer Rear Driveshaft at Rear Axle AWD

Moog
  • Greaseable Super Strength Universal Joint
  • 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 270 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter A - mm: 27.0
    • Length Axis 1:
      • 3.62
      • 91.9
    • Length Axis 2:
      • 3.62
      • 91.9
    • Length A - Inch: 3.62
    • OE Series: Spicer 1330
    • Length A - mm: 91.9
    • Bearing Diameter A - Inch: 1.063
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.063
      • 27.0
    • Bearing Diameter B - Inch: 1.063
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.62
    • Length B - mm: 91.9
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 27.0
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Drive Type
2004 - Ford Ranger At Transmission RWD
Showing 1 - 10 of 213 products

Loading...