Shop By Product Matching "accel"

Choose a Model for your 1967 Jeep

CJ5 CJ5A CJ6 CJ6A Commando DJ5 Dispatcher Gladiator J-100 Jeepster Universal Wagoneer

Showing 1 - 6 of 6 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1967 Jeep Dispatcher Spark Plug 6 Cyl 3.7L Accel

14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
U-Groove Spark Plug Header Plug
Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
- Package Quantity: 4
Features:
- C-Cut Ground Electrode
- Resistor Shorty Plugs
- 14mm Thread - .375 in. Reach
- Flat/Gasket Seat
- Projected Tip
- 13/16 in. Hex
ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Jeep Dispatcher	V	3687	6 Cyl 3.7L	225

8 In Stock

$60.27 CAD

$72.32 CAD

Brand	Accel
Part #	A360437S-4
Condition	New
Warehouse	B

1967 Jeep Wagoneer Distributor Cap and Rotor Kit 8 Cyl 5.3L Accel

Heavy Duty; Black
Distributor Cap And Rotor Kit; Heavy Duty; Black;
Distributor Cap And Rotor Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Offers Superior Protection From Arc-Thru and Crossfire
- Features 60K V Rated Alkyd Compound
- Brass Inserts/Steel Rotor Springs Provide High Spark Energy Flow
ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Jeep Wagoneer	V	5358	8 Cyl 5.3L	327

2 In Stock

$66.70 CAD

$80.04 CAD

Brand	Accel
Part #	A358124ACC
Condition	New
Warehouse	B

1967 Jeep Gladiator Ignition Coil Accel

Primary Resist 1.4 Ohms; Secondary 9.2 k Ohms; Turn Ratio 94:1; Max Voltage 42000V; Yellow
Super Stock Universal Performance Coil; Primary Resist 1.4 Ohms; Secondary 9.2 k Ohms; Up To 6500RPM; Turn Ratio 94:1; Max Voltage 42000V; Yellow;
Super Stock Universal Performance Coil
Product Attributes:
- WARNING CA Proposition 65: No
- Turns Ratio: 94:1
- Maximum Voltage: 42000
- Primary Resistance: 1.400 Ohms
- Package Quantity: 1
- Secondary Resistance: 9.2k Ohms
Features:
- 42000 Volts
- Effective To 6500 RPM
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Additional Fitment Information:

Vehicle
1967 - Jeep Gladiator

25 In Stock

$66.70 CAD

$80.04 CAD

Brand	Accel
Part #	A358140
Condition	New
Warehouse	B

1967 Jeep CJ5A Carburetor Accelerator Cable 6 Cyl 3.7L Crown Automotive

Throttle Cable;
Throttle Cable
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Throttle Cable
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1967 - Jeep CJ5A	V	3687	6 Cyl 3.7L	225

1 In Stock

$36.14 CAD

$43.37 CAD

Brand	Crown Automotive
Part #	C1YJ0942597
Condition	New
Warehouse	B

1967 Jeep CJ6 Accelerator Pedal Return Spring Crown Automotive

Accelerator Pedal Return Spring;
Accelerator Pedal Return Spring
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Accelerator Pedal Return Spring
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
1967 - Jeep CJ6

8 In Stock

$2.55 CAD

$3.06 CAD

Brand	Crown Automotive
Part #	C1YJ0803358
Condition	New
Warehouse	B

1967 Jeep Jeepster Ignition Contact Set Accel

High Performance; 32 oz.
Contact Assembly; High Performance; 32 oz.;
Contact Assembly
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.