Shop By Product Matching "icon Vehicle Dynamics"

Choose a Model for your 2019 Jeep

Wrangler

Showing 1 - 10 of 68 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2019 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Front Raise Height 2.5 (in)
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
  - (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
  - (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
  - (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Spring Color: Black
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Title: 18-up Jl/20-up Jt 2.5" Front Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL/2020-UP Jeep Gladiator 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JL/JT coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler or 2020-UP Jeep Gladiator.

Additional Fitment Information:

Vehicle	Position	Fuel Type
2019 - Jeep Wrangler	Front	GAS

5 In Stock

$390.05 CAD

$468.06 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322025
Condition	New
Warehouse	B

2019 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Front Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
  - (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
  - (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
  - (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Spring Color: Black
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Title: 18-up Jl/20-up Jt 2.5" Front Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL/2020-UP Jeep Gladiator 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JL/JT coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler or 2020-UP Jeep Gladiator.

Additional Fitment Information:

Vehicle	Position	Fuel Type	Sub Model
2019 - Jeep Wrangler	Front	GAS	Sport

5 In Stock

$390.05 CAD

$468.06 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322025
Condition	New
Warehouse	B

2019 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Front Raise Height 3.0 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
  - (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
  - (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
  - (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Spring Color: Black
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Title: 18-up Jl/20-up Jt 2.5" Front Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL/2020-UP Jeep Gladiator 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JL/JT coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler or 2020-UP Jeep Gladiator.

Additional Fitment Information:

Vehicle	Position	Sub Model
2019 - Jeep Wrangler	Front	Rubicon Deluxe

5 In Stock

$390.05 CAD

$468.06 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322025
Condition	New
Warehouse	B

2019 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Front Raise Height 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
  - (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
  - (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
  - (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Spring Color: Black
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Title: 18-up Jl/20-up Jt 2.5" Front Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL/2020-UP Jeep Gladiator 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JL/JT coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler or 2020-UP Jeep Gladiator.

Additional Fitment Information:

Vehicle	Position	Fuel Type	Sub Model
2019 - Jeep Wrangler	Front	GAS	Unlimited Rubicon

5 In Stock

$390.05 CAD

$468.06 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322025
Condition	New
Warehouse	B

2019 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Front Raise Height 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
  - (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
  - (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
  - (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
  - (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Spring Color: Black
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Title: 18-up Jl/20-up Jt 2.5" Front Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
Features:
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2018-UP Jeep Wrangler JL/2020-UP Jeep Gladiator 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JL/JT coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-UP Jeep JL Wrangler or 2020-UP Jeep Gladiator.

Additional Fitment Information:

Vehicle	Position	Sub Model
2019 - Jeep Wrangler	Front	Unlimited Moab

5 In Stock

$390.05 CAD

$468.06 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322025
Condition	New
Warehouse	B

2019 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Front ICON Vehicle Dynamics

with 0 (in) - 2.5 (in) Suspension Lift
These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift. High-quality FK rod end bearings eliminate bushing deflection for confidence inspiring handling and maximum articulation without binding.
18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Bushing Color: Gold
- Washers Included: Yes
- End 1 Type: Rod End Bearing
- Front Or Rear Suspension: Front
- Greaseable: No
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Grease Fittings Included: No
- Locking Nuts Included: Yes
- Pre-Greased: No
- Bolts Included: Yes
- Dust Boot Included: No
- Title: 18-up Jl/20-up Jt Front Sway Bar Link Kit
- Bushing Material: Rod End Bearing
Features:
- Billet aluminum sway bar links with laser etched ICON logos
- Adjustable while installed on vehicle to fine tune sway bar angle
- High quality FK rod ends eliminate bushing deflection for improved handling
These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.

Additional Fitment Information:

Vehicle	Position
2019 - Jeep Wrangler	Front

4 In Stock

$257.34 CAD

$308.81 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322061
Condition	New
Warehouse	B

2019 Jeep Wrangler Suspension Control Arm Kit - Rear Lower ICON Vehicle Dynamics

2018-UP JEEP JL REAR ADJUSTABLE LOWER LINK KIT
18-UP JL REAR ADJ LOWER LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 18-up Jl Rear Adj Lower Link Kit
- Control Arm Color: Black
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
Features:
- CNC machined & notched 1026 DOM steel construction
- Huge, PTFE-lined FK rod ends
- Adjustable in length for rear pinion angle adjustment
- Offers controlled deflection with maximum articulation and responsiveness
- No grease required for life of bushings
- Easy install into OEM mounts with application specific hardware
- High quality semi-glass black powder coat finish
- “ICON 1K” tested under rigorous off-road conditions to validate, performance, strength, and durability
- Fabricated components covered under ICON's lifetime warranty
ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends and multi durometer, maintenance free bushings for reduced deflection, link arm length adjustment and increased articulation, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.

Additional Fitment Information:

Vehicle	Position
2019 - Jeep Wrangler	Rear Lower

2 In Stock

$587.54 CAD

$705.05 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322023
Condition	New
Warehouse	B

2019 Jeep Wrangler Suspension Control Arm Kit - Front Upper ICON Vehicle Dynamics

ICON’s tubular steel front upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. PTFE-lined FK rod ends for increased suspension articulation and reduced deflection.
18-UP JL FRONT ADJ UPPER LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 18-up Jl Front Adj Upper Link Kit
- Control Arm Color: Black
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
Features:
- PTFE-lined rod end
- Adjustable in length for front caster angle adjustment
- Offers controlled deflection with maximum articulation and responsiveness
- Easy install into OEM mounts with application specific hardware
- High quality powder coat finish
- “ICON 1K” tested under rigorous off-road conditions to validate, performance, strength, and durability
ICON’s tubular steel front upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustment. The quality rod ends featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.

Additional Fitment Information:

Vehicle	Position
2019 - Jeep Wrangler	Front Upper

2 In Stock

$527.56 CAD

$633.07 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322022
Condition	New
Warehouse	B

2019 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Front ICON Vehicle Dynamics

with 2.5 (in) - 3.0 (in) Suspension Lift
These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift. High-quality FK rod end bearings eliminate bushing deflection for confidence inspiring handling and maximum articulation without binding.
18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Bushing Color: Gold
- Washers Included: Yes
- End 1 Type: Rod End Bearing
- Front Or Rear Suspension: Front
- Greaseable: No
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Grease Fittings Included: No
- Locking Nuts Included: Yes
- Pre-Greased: No
- Bolts Included: Yes
- Dust Boot Included: No
- Title: 18-up Jl/20-up Jt Front Sway Bar Link Kit
- Bushing Material: Rod End Bearing
Features:
- Billet aluminum sway bar links with laser etched ICON logos
- Adjustable while installed on vehicle to fine tune sway bar angle
- High quality FK rod ends eliminate bushing deflection for improved handling
These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.

Additional Fitment Information:

Vehicle	Position	Fuel Type	Sub Model
2019 - Jeep Wrangler	Front	GAS	Sport

4 In Stock

$257.34 CAD

$308.81 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322061
Condition	New
Warehouse	B

2019 Jeep Wrangler Suspension Control Arm Kit - Rear Lower ICON Vehicle Dynamics

with 3.0 (in) Maximum Lift Rear
2018-UP JEEP JL REAR ADJUSTABLE LOWER LINK KIT
18-UP JL REAR ADJ LOWER LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 18-up Jl Rear Adj Lower Link Kit
- Control Arm Color: Black
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
Features:
- CNC machined & notched 1026 DOM steel construction
- Huge, PTFE-lined FK rod ends
- Adjustable in length for rear pinion angle adjustment
- Offers controlled deflection with maximum articulation and responsiveness
- No grease required for life of bushings
- Easy install into OEM mounts with application specific hardware
- High quality semi-glass black powder coat finish
- “ICON 1K” tested under rigorous off-road conditions to validate, performance, strength, and durability
- Fabricated components covered under ICON's lifetime warranty
ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends and multi durometer, maintenance free bushings for reduced deflection, link arm length adjustment and increased articulation, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.