1964 Dodge Driveline and Axles Parts

Choose a Model for your 1964 Dodge

Showing 1 - 10 of 136 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1964 Dodge D100 Series Wheel Bearing and Race Set - Front Inner Timken

Tapered Roller Bearing Cone and Cup Assembly
Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1964 - Dodge D100 Series	Front Inner	RWD

Brand	Timken
Part #	SET5
Condition	New

UPC: 053893730387

1964 Dodge D200 Series Wheel Bearing and Race Set - Front Inner Timken

Tapered Roller Bearing Cone and Cup Assembly
12 in. x 2.5 in. Brakes
Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1964 - Dodge D200 Series	Front Inner	RWD

Brand	Timken
Part #	SET5
Condition	New

UPC: 053893730387

1964 Dodge D300 Series Wheel Bearing and Race Set - Front Inner Timken

Tapered Roller Bearing Cone and Cup Assembly
Heavy Duty Axle - Non B300 Drum
Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1964 - Dodge D300 Series	Front Inner	RWD

Brand	Timken
Part #	SET37
Condition	New

UPC: 053893730288

1964 Dodge W100 Series Differential Bearing Set - Rear Timken

Tapered Roller Bearing Cone and Cup Assembly
Dana/Spicer 70LD Axle
Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1964 - Dodge W100 Series	Rear

Brand	Timken
Part #	SET37
Condition	New

UPC: 053893730288

1964 Dodge W200 Series Axle Housing Cover Gasket - Rear FelPro

Axle Hsg. Cover or Diff. Seal
with 10 Bolt Holes Spicer 60 with 9.75in Ring Gear
FEL-PRO RDS 6095-1 Axle Hsg. Cover or Diff. Seal
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:

1685555, 1795158, 1922270, 2231855, 2232311, 2358865, 2428499, 2494737, 2515343, 2952471, 30281, 31978, 31979, 33232, 345660, 34686, 34687, 36016...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1964 - Dodge W200 Series	Rear

Brand	FelPro
Part #	RDS 6095-1
Condition	New

UPC: 084113720598

1964 Dodge W200 Series Axle Housing Cover Gasket - Front FelPro

Axle Hsg. Cover or Diff. Seal
with 10 Bolt Holes Spicer 44-3F with 8.5in Ring Gear
FEL-PRO RDS 6629 Axle Hsg. Cover or Diff. Seal
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:

27441X, 34685, 36016, 36030, C7TZ4036B, DT002, P27768T, P27768TC

Additional Fitment Information:

Vehicle	Position
1964 - Dodge W200 Series	Front

Brand	FelPro
Part #	RDS 6629
Condition	New

UPC: 084113720130

1964 Dodge 440 Differential Cover Gasket - Rear FelPro

Differential Cover Gasket
with 10 Bolt Holes with 8.25in Ring Gear ; Chrysler
FEL-PRO RDS 55047 Differential Cover Gasket
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:

2852922, 36012, 4049689, DS14211, DT007, P18564, P18564TC

Additional Fitment Information:

Vehicle	Position
1964 - Dodge 440	Rear

Brand	FelPro
Part #	RDS 55047
Condition	New

UPC: 084113720536

1964 Dodge W200 Series Differential - Rear Auburn Gear

Auburn Gear Ected Max Differential
Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down
Auburn Gear Ected Max Differential; Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down;
Auburn Gear Ected Max
Features:
- Selectable Full Locker And Limited Slip In One Unit
- Can Be Engaged/Disengaged At Any Reasonable Speed
- Smooth Quiet Operation
- Can Be Use With Or Without Lockout Hubs
- Made From 9310 Heat Treated Billet Steel
- Backed By 1 Year Warranty
- Covered w/4 Year Differential-Replacement Exchange
- Made In The USA
The ECTED Max is a selectable traction device; an on/off switch is mounted near the driver. When off–the clutch pack,located behind the side gear provides the limited slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed and thereby providing bias torque to the high traction wheel–your performance limited slip differential action. When selected on, current is sent to the electromagnetic coil. The coil is retained by a clip that fits over one of the bearing cap bolts, making it non-rotational. The coil rides on a ball bearing. The ball bearings spin with the differential case. The coil creates a magnetic flux so that the pilot cone is pulled into engagement with the differential case. This frictional engagement causes the bearing balls to ride up on a ramp machined into the side gear. This radial travel of the balls also causes lateral movement of the side gear. This applies a force onto the center block. The center block has an elongated hole that the center pin fits through, allowing it to float. The center block applies force to the opposite side gear, compressing the clutch pack giving the user a solid axle assembly–the spool/locker performance you desire at the strip/off-road. ECTED Max gearing is made from aircraft quality, 9310 heat-treated billet steel. Tough as nails! ECTED Max can be switched on or off on the fly, at any road speed. ECTED Max does not have any shift forks or pins that must be lined up to obtain locker mode. ECTED Max is quiet. Good-bye to noisy lockers! ECTED Max is backed by industry-leading 1 year warranty, like all Auburn Gear Performance Differentials. ECTED Max is backed by the industry-exclusive program. D-REX=Differential–Replacement EXchange Program. ECTED Max can be used in front axle applications–with or w/out lockout hubs. ECTED Max is the only selectable locker offering both limited slip and locker modes. Forget the rest-go with the best!

Additional Fitment Information:

Vehicle	Position
1964 - Dodge W200 Series	Rear

Brand	Auburn Gear
Part #	545035
Condition	New

1964 Dodge W200 Series Locking Hub Mile Marker

19 Spline; 6 Bolts
Mile Marker Supreme Manual Hub; 19 Spline; 6 Bolts;
Mile Marker Supreme Manual Hub
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.

Additional Fitment Information:

Vehicle
1964 - Dodge W200 Series

Brand	Mile Marker
Part #	423
Condition	New

1964 Dodge W200 Series Locking Hub Mile Marker

19 Spline; 6 Bolts
Mile Marker Supreme Manual Hub; 19 Spline; 6 Bolts;
Mile Marker Supreme Manual Hub
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.