Shop By Product Matching "accel"


Showing 1 - 10 of 12 products
Image
SKU
Product
Rating
Price

Accel
  • Standard; Shorty Plug For Headers; 4 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; Standard; Shorty Plug For Headers; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: No
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 4
  • Features:
    • Header-Box
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge W200 L 3687 6 Cyl 3.7L 225

Accel
  • 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.030 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 4
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Improves Spark Plug Access To Fit Socket Or Wrench
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Ramcharger L 3687 6 Cyl 3.7L 225

Accel
  • 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .375 in. Reach; Heat Range 6; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.1875 In.
    • Reach: 0.375 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.035 In.
    • Package Quantity: 4
  • Features:
    • C-Cut Ground Electrode
    • Resistor Shorty Plugs
    • 14mm Thread - .375 in. Reach
    • Flat/Gasket Seat
    • Projected Tip
    • 13/16 in. Hex
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Monaco V 7211 8 Cyl 7.2L 440

Accel
  • Black; 8mm; Graphite Core; 90 Deg. Boots
  • Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; 90 Deg. Boots;
  • Universal Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Superstock
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: Yes
    • Core Type: Carbon Graphite
    • Boot Type: 90 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Resistance: Meets Or Exceeds Oe
    • Boot Angle: 90 Degree
  • Features:
    • 7mm And 8mm High Gloss Silicone Jacket
    • 450° F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • RFI Suppression For Street Driven Applications
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Monaco V 7211 8 Cyl 7.2L 440

Accel
  • Red; 8mm; Graphite Core; 90 Deg. Boots
  • Universal Fit Spark Plug Wire Set; Red; 8mm; Graphite Core; 90 Deg. Boots;
  • Universal Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Superstock
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: Yes
    • Core Type: Carbon Graphite
    • Boot Type: 90 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Resistance: Meets Or Exceeds Oe
    • Boot Angle: 90 Degree
  • Features:
    • 7mm And 8mm High Gloss Silicone Jacket
    • 450° F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • RFI Suppression For Street Driven Applications
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Monaco V 6556 8 Cyl 6.6L 400

Accel
  • Yellow Wire; 8mm; Graphite Core; 90 Deg. Boots
  • Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; 90 Deg. Boots;
  • Universal Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Type: 90 Degree
    • Engine: Universal 8 Cylinder
    • Boot Angle: 90 Degree
    • Wire Series: Superstock
    • Core Type: Carbon Graphite
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Resistance: Meets Or Exceeds Oe
  • Features:
    • 7mm And 8mm High Gloss Silicone Jacket
    • 450° F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • RFI Suppression For Street Driven Applications
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Ramcharger V 7211 8 Cyl 7.2L 440

Accel
  • 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.1875 In.
    • Reach: 0.375 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.035 In.
    • Package Quantity: 8
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge W150 V 6556 8 Cyl 6.6L 400

Accel
  • 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0574S-4]; 8 Pack;0.035 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0574S-4]; 8 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.035 In.
    • Package Quantity: 8
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1977 - Dodge Monaco V 7211 8 Cyl 7.2L Base 440

Accel
  • Socket Style; Tan
  • Distributor Cap And Rotor Kit; Socket Style; Tan;
  • Distributor Cap And Rotor Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Features Protection From Arc Thru And Crossfire
    • Features 60K V Rated Alkyd Compound
    • Brass Terminals Inserts And Steel Rotor Springs
    • High Spark Energy Flow
    • See Catalog For Application Information
  • ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Additional Fitment Information:
Vehicle
1977 - Dodge Diplomat

Accel
  • Blue; 8mm; Graphite Core; 90 Deg. Boots
  • Universal Fit Spark Plug Wire Set; Blue; 8mm; Graphite Core; 90 Deg. Boots;
  • Universal Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Superstock
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: Yes
    • Core Type: Carbon Graphite
    • Boot Type: 90 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Resistance: Meets Or Exceeds Oe
    • Boot Angle: 90 Degree
  • Features:
    • Silicone Spark Plug Boots
    • 90 Degree Spark Plug Boot Angle
    • 450 Degree Wire Temperature Rating
    • Meets Or Exceeds OE Boot Temperature Rating
    • Meets or Exceeds OE Resistance
    • Cooper Core
    • Limited 90 Day Warranty
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Dodge Ramcharger V 7211 8 Cyl 7.2L 440
Showing 1 - 10 of 12 products

Loading...